lamiera

Hello, everyone. I have a doubt about the drafting of the table of a sheet for indications on laser cutting of some letters. as a final result you want to get some milk of this alphabet in thickness 10/15 (1.5mm). how can I indicate on the table to the supplier that I only need letters and not...

Good evening. how to create texts through holes in sheet metal solid edge environment? I apologize for ignorance, but I recently changed work and so far I never needed to use this function (if available). allego photo of example. thank you so much to those who will and will want to help me.

Good morning to all, I have a problem with the flattened function in an elliptical sheet. the piece under construction is a blinding tea with invitation to 45°. Unlike the other sheet this portion of sheet does not flatten me and I cannot understand why. I'm not an expert on solidworks. Thank...

I recently started using inventor 2020 for work, we mainly produce sheet metal components and sometimes tubular. in these days I have read and sought many discussions but still unfortunately I have not managed to come to the head of my problem or: exists a way to insert in a set (a) other...

Good morning, everyone. I happen to have to model the sheet of which I attach the original table. I wanted to ask someone who knows the sheet metal tools better than me, if there is a tool to achieve the reinforcement rig, the one that you see in section. thanks to all of the help p.s...

Hello, everyone. I am new in the forum so...first message! I tried to look for the topic that I need clarification on the already open discussions but I did not find how much I need. Here's what I can't do: fold a plate having the fold line on a 3d sketch and not 2d (so 2 different floors). I...

Good morning to all, actively return to this forum after years of inuse. already, because I returned after years of fasting to design with the 3d. today I find myself to remain the software (I like it) but for different purposes (I was passed by "simple" sheets for photovoltaic structures to...

hello to everyone, I am new on this very interesting forum. here is my problem: I have to make a 6mm steel pipe; I swipe a single sheet part in which I will use a loft extrusion and which has 3 folds: the central one I will make it to 90° with a type of punch (internal ring 30, deduction of fold...

someone gives me a hand to do this: I am trying to make a silos of which this It's a part of the cylinder. with the profiling tool I can make this quarter of cylinder with upper and lower flanges. but the side ones can't do it. How can I do that?

Hello, everyone! I just started working in sheet mode. I would like to know if it is possible to create a dome that can also generate flat shape.

Good morning to all, I'm a new user and I'm addressing the immense knowledge of the community to solve a problem that I can't handle. the structure that I have to realize is mainly composed of two sheets boxed in c40 that act as shoulders, connected between them by 4 rods always in c40 (imagine...

hello to everyone, is it possible to make the development of one part of a sheet? i.e. I have a carter that I had to divide into two parts for external processing issues, how do I tell inventor what part I want to see in development? thanks for the help

Bye to all, I use inventor 2012 and I asked if it was possible to create a thickness table that allows me to select it and already has within it the desired values relative to that thickness, to avoid having to change the parameters whenever I use it. Thanks :)

Hello everyone and thank you for your help. I try to explain in a clear way, I design the sheet metal parts in sw and then provide to my lamier the constructive design of the part without giving it the development. In this way, however, he must remake the piece every time and develop it by...

Good morning, everyone. I have the following question to ask you about the naval dismantlement plates that are sometimes bought by the carpenters of heavy metal structures and bases, at prices below the commercial plates and above all with poor mechanical characteristics. I would like to...

good morning to all, has arrived the new version of spaceclaim 2015 improved, refined and even faster and rich. actually came out more than a week ago; I wanted to write before but better late than ever, didn't I? This new version in addition to improving design and sheet functions, has expanded...

hi, I have a problem, I had created a discussion about industrial design and I would not want to create doubles but the question is now specific to solidworks then. . I have to create a fitting sheet (see attached picture) how can I do it? the result is that in the photo. created the sheet metal...

Hello everyone, I'm trying to figure out if inventor does it to my case, I've been using it for a few days exclusively in the sheet where I'm slowly making the items I need. I stopped, however, on the realization of this tub I attach the design. . to realize it and to develop it with rhino I...

Good morning, guys, I'm a baby with a cat and I want your help. I'm making a piece in generative sheetmetal design environment and after doing the flange, I can't manage the ends that you come to create... how do I "remember" these living edges? Thanks mile!

Bye to all, some of you know if with inventor you can simulate a thermal expansion of a plate. more precisely than a bimetal, that is a sheet composed of two lamina of different materials, with different thermal expansion coefficients. I should create an animation that makes the idea of the...