3d printers

[liserunner]

Hello!
are a solid edge user, working in r&d area and we are thinking of equipping us with a 3d printer type
makerbotx2 for rapid prototyping of small objects. Does anyone have experience/suggestions/recommendations about it?

 

[usman123]

a solid edge user, working in r & d area and are planning to equip ourselves with a 3d printer type
makerbotx2 for rapid prototyping of small objects. do

 

[Calligaris Alessandro]

Hello!
are a solid edge user, working in r&d area and we are thinking of equipping us with a 3d printer type
makerbotx2 for rapid prototyping of small objects. Does anyone have experience/suggestions/recommendations about it?

Good morning
are a 3d size printer user and I follow with curiosity the development of this new generation
cheap machines. if you are directed towards the production of small objects first I would check
if the machine is able to maintain the detail and its robustness and if there is a telephone assistance regarding
to those sudden hitches both software and hardware that also concern brands much more blasoned.
I think there's not much going on about these machines.
the real vision of a working machine is indispensable before the final decision.

with good wishes....a. calligaris

 

[ShareMind]

Hello!
are a solid edge user, working in r&d area and we are thinking of equipping us with a 3d printer type
makerbotx2 for rapid prototyping of small objects. Does anyone have experience/suggestions/recommendations about it?

Hi.

of suggestions you will probably receive many. but of course, choosing a model or another will ultimately depend on your specific needs.
so, if you can help, mark it two general orientation links compared to desktop 3d printers:3d Printers Guide (about 175 models)3d Printer Buying Guide (a series of questions to be asked to identify the most suitable model for your needs).
I hope you can be useful.

 

[frankq]

Hi.
the sangiorgio library of pistoia has a 3d makerbot printer, available to users.
I am using it these days to reproduce parts of an i3 replica printer that I start building for my personal use.
It's very simple to use, use 1.75 mm diam pla wire.
If you are in the area you should pop by and try.
franc