cylindrical panel with stringer and ring both blade

[portasdonda]

Hello, guys, I'm a mechanical engineering student of bari and I'm at first with ansys for the realization of the thesis. I have to make a cylindrical panel with stringer and ring (reinforcements respectively axial and transverse) both to blade. I wanted to know what the command was to set the paramentary variables through which I can go to define my keypoints through which to generate the panel. Thanks

 

[volaff]

Excuse me, but what ansys do you use? classic or work bench?

"I wanted to know what the command was to set the paramentary variables through which I can go to define my keypoints through which to generate the panel" I have to interpret it. . auh auh

 

[portasdonda]

Excuse me, but what ansys do you use? classic or work bench?

"I wanted to know what the command was to set the paramentary variables through which I can go to define my keypoints through which to generate the panel" I have to interpret it. . auh auh

Sorry, classic ansys.

with regard to the discourse of variables, I have hardly put myself and reading from the material I have available, I have seen that paramatric variables are set (of the type: panel length=l= 200 m) to be able to then define the position of the keypoints; I hope to have explained and apologize if I use a language we say questionable

 

[volaff]

I know what you mean but I never "worked" like that. I am used first to define kp, then lines, areas and similar.

I recommend the book "the finite element method and applications in engineering using ansys " or consult some guides in English naturally.

If you miss the bases sec me you will never adore to shape that panel!

 

[portasdonda]

I know what you mean but I never "worked" like that. I am used first to define kp, then lines, areas and similar.

I recommend the book "the finite element method and applications in engineering using ansys " or consult some guides in English naturally.

If you miss the bases sec me you will never adore to shape that panel!

I understand, thank you for the advice.

having to realize reinforcements with own web and flanges, the use of parametric variables would be obliged. Please note any other answers

 

[volaff]

question but you for parameter variables you mean?

 

[portasdonda]

question but you for parameter variables you mean?

simple parameters, of the type r (curve radius), l (cylinder length) and then go to define the points positions with these variables and go to combine them, thus making parametric equations.

 

[portasdonda]

However I solved
simply with *set and I define my parameter.

 

[stefano.garbin]

you don't need books, the ansys guide is more than complete.
go to "mechanical apdl" and then in the chapter "ansys parametric design language".
study it well, hello

 

[portasdonda]

I managed to create my panel, playing a bari unit, I meshato it and now I wanted to ask something that can be stupid, how do I see how many mesh and nodes I have? Thank you very much

 

[volaff]

hallucinating! ! !
the fundamentals are missing! !

I think you're not going anywhere!

cme in the bar type:

All the way

/stat,global

and you should have all the info about the number of mesh, nodi ect ect
ps: as the good stefano garbin said (which I still thank for the patience shown with me) read the chapter that suggested you.

find all the commands you need, little but sure!

 

[portasdonda]

I would love to learn how to use ansys as complete and precise as possible. I have to do this work within 2 weeks so I try to help even in the most brazen and acceptable ways possible. Thank you for the answer

 

[volaff]

Thesis work in two weeks?
with ansys my pro for the thesis made me lose 6/8 months.. Let's go!

Good Sunday!

 

[r.rifino1]

Hi, I'm sorry I'd have your own argument. Could I ask you about this?

 

[exxon]

poor us.. .

 

[volaff]

Who are you talking to? @r.rifino1

 

[r.rifino1]

I had a doubt about ansys passage, but I already solved it. Thanks anyway.