volaff
Guest
Bye, guys.
I wanted to study the behaviour of a tree that was understated at a moment.
I made a flat mesh with plane elements 82 and I wanted to create the solid volume using solid95 elements through a mesh extrusion with the vrotat command, only that in the realization of the volume gives me an error on the size (shape) of the mesh.
finish
_
_
[Bleep] parameters
_
b) 130/2
== sync, corrected by elderman ==
d = 100
♪
♪
material and type of element
/prep7
mp,ex,1,2.06e+007
mp,prxy,0.3
et, 1.82
et,2,95
!
blc4,0,b,b
blc4,b,0,l-b,b
aglue,all
Cyl4,0,b,ri
asba,1,2
Idiv, 11,0.5, ,2,0
l,2,4
asbl, 4, 4
!meshing!
lsel,s,,3
lsel,a,11
lsel,a,1
Isel,a,2
lsel,a,6
♪
Isel,s,12
Isel,a,13
♪
lsel,s,,4
lsel,a,9
lsel,a,10
♪
mshape,0
mshkey,1
amesh,all
type, 2
extopt,esize,5,0
extopt, aclear,1
!
extopt,attr,0,0
♪
♪
Esys,0
Asel,all
I'm sorry.
Does anyone know how I can solve this?
Thank you all.
I wanted to study the behaviour of a tree that was understated at a moment.
I made a flat mesh with plane elements 82 and I wanted to create the solid volume using solid95 elements through a mesh extrusion with the vrotat command, only that in the realization of the volume gives me an error on the size (shape) of the mesh.
finish
_
_
[Bleep] parameters
_
b) 130/2
== sync, corrected by elderman ==
d = 100
♪
♪
material and type of element
/prep7
mp,ex,1,2.06e+007
mp,prxy,0.3
et, 1.82
et,2,95
!
blc4,0,b,b
blc4,b,0,l-b,b
aglue,all
Cyl4,0,b,ri
asba,1,2
Idiv, 11,0.5, ,2,0
l,2,4
asbl, 4, 4
!meshing!
lsel,s,,3
lsel,a,11
lsel,a,1
Isel,a,2
lsel,a,6
♪
Isel,s,12
Isel,a,13
♪
lsel,s,,4
lsel,a,9
lsel,a,10
♪
mshape,0
mshkey,1
amesh,all
type, 2
extopt,esize,5,0
extopt, aclear,1
!
extopt,attr,0,0
♪
♪
Esys,0
Asel,all
I'm sorry.
Does anyone know how I can solve this?
Thank you all.