selection in the graphic area

[Beth]

Hello,

I use the wf5 and I would like to know if it is possible to insert into a level a set of components by selecting them at once only
with a window, the filter gives me the component voice that would seem the correct one but when I use it I don't select anything and touch me select them one by one.
you have some solution to recommend, the use of the model tree is not always convenient especially when the axieme has many components.

thanks in advance

 

[BFausto]

Hi.
I'm trying to answer you.

at the bottom right (in creo), near the binoculars select:
→ selection with window 3d
then select a floor for the 3d window support and then two clicks that define the window itself (including drags for resize).

 

[BFausto]

while if I don't remember badly in wf5 you have to create an area section (define section volume even with radial distance).
after research (binoculars) “part” you find it under “geometria” “zone”.

 

[Beth]

Thank you

 

[MORENO100]

Hey, beth,
for what I know, the proe does not allow to make a selection of the components of a set, simply "inflating" them in a rectangle selection, type autocad to understand.
the only way to carry out a multiple selection of components to be annexed to a level, is through the rules of
"research tool."
to help you:
1 - write that you cannot impose a correct filter, if you explain to me better what it should do, I will try to help you.
2 - in more experimental and Moroccan way I can suggest this procedure defined by me, which I use to declare the attribute of each single composed in a semi-finished gup identified with a recurring name, recallable precisely with a "certain component" or in a rdrw table with "region repetition" but I don't know if that's what you need. is not a fast selection system but allows you to "disappear" components in a simple way within a same set.

You know, bye.


p.p.s. I'm sorry, I didn't read that they had already answered you....:3515:

 

[Beth]

hello to all I always care a lot about your more or less Moroccan strategy that they are.
One thing seems clear to me there is no fast autocad system as it was called. I'll tell you what.
search tool imposed solid model. At that point you activate the options display I choose at that point the sub option that can be visualized hidden etc. and start the search with ok . advantage that works well. disadvantage that is not selective as a window I cannot exclude some of the elements to video.
hello thanks and at your disposal for clarifications

 

[Beth]

hello to all I always care a lot about your more or less Moroccan strategy that they are.
One thing seems clear to me there is no fast autocad system as it was called. I'll tell you what.
search tool imposed solid model. At that point you activate the options display I choose at that point the sub option that can be visualized hidden etc. and start the search with ok . advantage that works well. disadvantage that is not selective as a window I cannot exclude some of the elements to video.
hello thanks and at your disposal for clarifications

I am not mistaken, but I have a vague memory of the wf3. It is not that we can do something by setting up a config.