nx6 e ansys workbench 12.0

[liviaccio]

Bye to all,
are in the most total panic: I can't configure the nx6 interface for ansys workbench 12.0.
I ask if any of you have already had this experience and can help me.
I have to make does with different geometric/physical parameters and without the interface it would become a massacre.
Thank you 1000 to those who want to help me.

 

[IPdesign]

can you post what changes you have already made to try the configuration?
e.g. environmental variables?
Try to configurfare the nozzle_env.dat?

I don't know what ansys asks, but at least if someone has an idea, they're getting closer.

 

[liviaccio]

hi ip, thanks for being interested.
Windows 7 64bit operating system. ansys 12.0 workbench 64bit.
the changes made are:
- system environment variable (not user) ugii_custom_directory_file set on c:\users\liviaccio\appdata\roaming\ansys\v120\unigraphics\custom_dirs.dat\

- system environment variable (not user) ugii_vendor_dir set on c:\programs\ansys inc\v120\ansys\ac4\bin\ug50\winx64 (in the path there is the file ansconug50 that when I try to launch it from' the following error: libufun.dll not present in your computer)

- in the file "regnx6" present in the path c:\programs\ansys inc\v120\aisol\cad integration\unigraphicsnx6\winx64\startup I replaced "/s /1" with the entire paths of the two dlls "dspluginug6com" (presented in startup) and "agpsutilu.dll" present in winx64). I would be useful to receive information about how the "regnx6" is written in full.

- in the file "custom_dirs.dat" I entered only the following address c:\programs\ansys inc\v120\aisol\cad integration\unigraphicsnx6\winx64

I don't know how to change it. . .

These are the changes I've made, I've tried to cuff us up a bit, but nothing:frown:

What do you suggest? Thank you!

 

[IPdesign]

The only thing that comes to mind,
in the file "custom_dirs.dat" I entered only the following address c:\programs\ansys inc\v120\aisol\cad

Is the inride enclosed between the quotes? "" having spaces it is possible that you do not read it correctly without

 

[liviaccio]

Try... still nothing.. .

 

[stef_design]

Is nx in Italian and ansys in English?
Perhaps it is a "conflict" of liangua

 

[liviaccio]

I'm trying all

 

[stef_design]

I'm trying all

Is it really impossible to work without the integration of ansys in nx?
Can't you save an iges every time and then reopen it in wb?

 

[The_Matrix]

I'll throw them...
but is version 12 of ansys wb compatible with nx6? Have you checked with the types of ansys?
Isn't one ahead of the other?

ps: take nx advanced simulation so you have a stuff that goes better... integrated... and solve problems... (laughs)

 

[liviaccio]

Yes, the nx6 version is very compatible with ansys 12.. .
the problem is that advanced simulation cannot be set experimental plans automatically by changing parameters.. At least I couldn't do it. . .

 

[The_Matrix]

Yes, the nx6 version is very compatible with ansys 12.. .
the problem is that advanced simulation cannot be set experimental plans automatically by changing parameters.. At least I couldn't do it. . .

another question of ca@@o: but those of ansys who say? ?
do they have an installation guide to collaborate with the 2 software?
... because it seems to me that the problem, more than the nx side, is ansys side, is it?

... I don't know what the "experimental plans automatically changing parameters", so I don't know what to tell you.

 

[liviaccio]

The thing is, I followed the instructions given by ansys, but in the end I built the model in ansys deisgn modeler even though it's not a phenomenon in modeling, but for what I have to do it can go :frown:

experimental plans: changing the parameters of the model (dimensions, materials, etc...) according to different values established for each parameter you reach (according to statistical techniques proper to the six sigma methodology) to the identification (with a certain probability statistical) of the parameters that most 'influence the mechanics/physics of the problem in question. It looks like a supercazzola but it's not!

 

[liviaccio]

scoperto l'arcano...ansys workbench 12.0 non supporta windows 7
da ansys workbench 12.1 e' supportato windows 7... :frown:

 

[The_Matrix]

The thing is, I followed the instructions given by ansys, but in the end I built the model in ansys deisgn modeler even though it's not a phenomenon in modeling, but for what I have to do it can go :frown:

experimental plans: changing the parameters of the model (dimensions, materials, etc...) according to different values established for each parameter you reach (according to statistical techniques proper to the six sigma methodology) to the identification (with a certain probability statistical) of the parameters that most 'influence the mechanics/physics of the problem in question. It looks like a supercazzola but it's not!

now I understand.. .
you can also do with nx and nx/adv simulation

 

[The_Matrix]

scoperto l'arcano...ansys workbench 12.0 non supporta windows 7
da ansys workbench 12.1 e' supportato windows 7... :frown:

Glad you got it. . .
ps. I don't want to go up in the thread...
but w7 64 bit, I hope.. .

 

[liviaccio]

Of course, 64 bits!

 

[The_Matrix]

Of course, 64 bits!

less bad.. .
I just installed nx7.5.2 beta on a w7 with fx4800 if I remember... attentive to the nvidia drivers... the defaults made them comb. . .
Just put the last dumped noug went like a splinter

 

[liviaccio]

Thank you for your ad!
I hope to let you know that even with nx advsim I managed to do the same thing

 

[stef_design]

Thank you for your ad!
I hope to let you know that even with nx advsim I managed to do the same thing

pro and against respect ansys?