creo 1.0 f000 non-very fluid model rotation with nvidia gaming board

[Matteo]

I could think of reselling my fx1500 as used for 250€:smile:

 

[Parametric_Ozzy]

hi arzi
Unfortunately it is true cmq as it says ozzy on ebay if you just want to find something, but if it is on a laptop I'm not sure it is possible

I confirm, if it's a laptop, I see it hard. .
at that point better buy the laptop on ebay.

I could think of reselling my fx1500 as used for 250€:smile:

Shot voi... :finger:

 

[arzigogolo]

Take a ride on e-bay... find an opportunity picture of excellent bill, surely the other programs will benefit.

I have already done it and it is actually full of picture video cards even from excellent prices. for now I can't afford it yet, maybe for Christmas
I think about the 2000 picture, which, as Matteo says, seems to me an excellent tab (I checked the features on the link he sent me).

una nvidia quadro 2000, brand new costs 500€ + VAT... considering what you spend in maintenance of the cads in list is very little.

I recommend it to you: certified proe and swx, fast and with 1gb of memory.

Among other things, you can configure it specifically for each cad by choosing the configuration from a control panel.

conversion of gt boards to framework was feasible a few years ago, now I don't think it's just a matter of driver, most likely a minimum of manualness with welder and electronics takes us.

hello matteo, thanks for the advice: I checked the technical features on your link and they are completely respectful. It seems to me an excellent way between those of low-end (always of painting I speak) that do not cost much, but go also little and those of high-end that cost a lot.
It is true, with what cost me in maintenance these programs, unfortunately now I cannot afford to make other expenses.:smile:

It is not true that a quality card should cost the amount you indicated.
a fx 380 (entry level) costs 120 euros, a fx 580 costs 160 euros, a fx 1800 or a 2000 cost 350 euros, a fx 3800 (here we are already on high-level cards) costs 750 euros.

that's all.

Surely as you say of picture cards there are of all prices depending on the band, the price between 1500 and 2000 euros I quoted was referred to the picture fx 4800 and that is the equivalent of my geforce 280 gtx amp, I forgot to specify it.
However if I had to buy a painting, I think my choice would fall on 2000 recommended by matteo.
The only picture I have ever had (and that I still have, now unused) is the 4 550 xgl picture with 64 mb of ram. anachronism by now!:tongue:
my geforce paid it 190 euros half-new on ebay last year and I assure you that it is a monster! has already overcloaked operating frequencies of very high factory and the passing band is 512 bits. the best card I've ever had. Then, of course, it may happen that it is not compatible with all 100% cad programs as it happens to me with creo.

hi arzi
Unfortunately it is true cmq as it says ozzy on ebay if you just want to find something, but if it is on a laptop I'm not sure it is possible

Yes, I also saw a fx4800 picture at 500 euros on ebay. for me now always too high, but still a great price if compared to others starting from 1400 euros up.