eccentric cam

[Grotto]

I was looking for the relationship between the b and the rotation angle of the cam shaft.
Can anyone help me?

 

[gerod]

Magri first shows up! .... aurea rule of forums.
then you explain the problem maybe giving some info!
Thank you.

 

[cacciatorino]

I was looking for the relationship between the b and the rotation angle of the cam shaft.
Can anyone help me?

Look at the annex, tell me if you're convinced.... That mechanism is like an endlessly long biella handler.

p.s. I did it by hand to make shiren happy! :biggrin::biggrin:

 

[Grotto]

Good morning.
I apologize for the previous entry message but I had a bit of a rush.
I am a plc pogrammer of an industrial automation firm of vicenza.
our problem is the following: a brushless motor is bound to the design cam shaft and we know the rotation angle.
I would need to know the link between the position in engine degrees and the vertical shift of the grey support pushed by the cam.
If anyone can help me.

Thank you.

 

[PaoloColombani]

I would need to know the link between the position in engine degrees and the vertical shift of the grey support pushed by the cam.
If anyone can help me.

Thank you.

Hi, hunting has already answered you correctly.
If you want to simplify further, you can consider the (95)y deviation caused by eccentric rotation, which is the projection of the eccentric center on the axis of the ordered with origin in the center of rotation.

using the same hunting symbolism, you write:

, , , , , α

 

[Grotto]

Good morning, I wanted to thank you for the information, I was helpful.