zw3d chi lo usa?

[monster]

Hey, guys.

I absolutely need to know how this program behaves with the molds, I don't have time to go up to varese to make me a demo if someone wants to make me a demo in the padovano areas well come! :frown:

urgent!

...thank you

 

[Paolo.M]

Hey, guys.

I absolutely need to know how this program behaves with the molds, I don't have time to go up to varese to make me a demo if someone wants to make me a demo in the padovano areas well come! :frown:

urgent!

...thank you

we use zw3d, great software for molds and parametric modeling

 

[Polymar]

I have witnessed a demonstration of a retailer of pleasure and I must say that with regard to the pure hybrid modeling (=solid + superfici) it does not fear comparisons, my purely personal impression is that all that appears "difficult" with other cads much more blasoned, with this zw3d is a nonsense. the table is better but cmq acceptable, while from the sheet-metal I expected more. pulling the sums premium version to 5k € seems to me a good investment

 

[Paolo.M]

I have witnessed a demonstration of a retailer of pleasure and I must say that with regard to the pure hybrid modeling (=solid + superfici) it does not fear comparisons, my purely personal impression is that all that appears "difficult" with other cads much more blasoned, with this zw3d is a nonsense. the table is better but cmq acceptable, while from the sheet-metal I expected more. pulling the sums premium version to 5k € seems to me a good investment

Your consideration is very right, zw3d is perhaps the most powerful hybrid modeler on the market! ! ! ! ! ! ! ! ! ! ! !

 

[Paolo.M]

made a round dharma-engineering

 

[Polymar]

I have made the round and I must say that the examples show only a small part of the potential of this modeler. Moreover it has been on the market for many years and doing some tests I really appeared very stable. but what surprised me most is the interface, so different from all other programs and at the same time more "clean" and ordered. the prox week we will also see a demo of the module cam

 

[ceronte]

made a round dharma-engineering

kind paolo.m I tried unnecessarily to have info from "dharma engineering" after having had a contact in mecspe and evaluated the scaffolding of the zw3d both for price and quality, but unfortunately not even a signal. (I had spoken to you personally)

 

[Polymar]

@ceronte: if you want to better assess the potential of zw3d in full calm, install the demo and read the doc contained in the subfolder \pdf .

 

[Er Presidente]

I have witnessed a demonstration of a retailer of pleasure and I must say that with regard to the pure hybrid modeling (=solid + superfici) it does not fear comparisons, my purely personal impression is that all that appears "difficult" with other cads much more blasoned, with this zw3d is a nonsense. the table is better but cmq acceptable, while from the sheet-metal I expected more. pulling the sums premium version to 5k € seems to me a good investment

kind paolo.m I tried unnecessarily to have info from "dharma engineering" after having had a contact in mecspe and evaluated the scaffolding of the zw3d both for price and quality, but unfortunately not even a signal. (I had spoken to you personally)

This discussion is interesting. curious that a dealer goes to see the demonstrations of another dealer to discover the potential of the product he sells.

 

[Paolo.M]

kind paolo.m I tried unnecessarily to have info from "dharma engineering" after having had a contact in mecspe and evaluated the scaffolding of the zw3d both for price and quality, but unfortunately not even a signal. (I had spoken to you personally)

Good morning,
always available for chierimenti.

 

[Paolo.M]

Hey, guys.

I absolutely need to know how this program behaves with the molds, I don't have time to go up to varese to make me a demo if someone wants to make me a demo in the padovano areas well come! :frown:

urgent!

...thank you

As I already said if you want information about zw3d you can write to me [Bleep] edit moderator: use mps and not put private emails in public

 

[Kattivo83]

Well? Dead discussion? Nobody uses it?

 

[The_Matrix]

Well? Dead discussion? Nobody uses it?

sincerely ever seen a customer use it. . .
I wonder what might push a company to take a cad of this kind when you take the same money with all due respect.
taking a cad as zetavu3di means:
- always have users to form as anyone who hires will not know
- feel lonely on the island
- do not have app or information

 

[Kattivo83]

I'm not a dealer, I think it's important to specify it.
I use it for more than 10 years, when it was called vx (precisely I started with version 8).
sincerely, it is true that it is a lot that I do not look around, but a cad\cam solution so valid and complete at that price I think it is difficult to find. Moreover it really takes little (I realize however not to be objective now) to learn to use it, because of the very simple one.

 

[Lucky66]

hi I started with v2012 now I am at 2015sp1,now I learned to use it quite well, I can confirm that it is a complete and always evolving paramertic cad.
I project draw and die casting molds also complex and I got good results.
what is interesting are the direct importers of other cads!! I make many conversions to my customers who have other catia nx or creo systems, because most do not have importers from one system to another (in zw are included in the license)
other interesting thing that in the license are included libraries canedas ,traceparts and partsolution
Hi.

 

[dog40]

Good morning to all,
design plastic molds for about a year, I have been designing mechanics for about 3 years and use zw from 4/5 months. I come from solidworks, solid edge, and toptron, but I have never found myself well so far as I am finding myself with zw3d.
I haven't tested it as a cam yet, but how cad is really great. I confirm simplicity of use and excellent reliability in hybrid modeling.
anyone who uses it and wants to exchange opinions, opinions or assess together obstacles and difficulties are at complete disposal.
In fact, the problem of "being alone on the island" remains with this platform, but it repays it great with its own potential, and perhaps comparing between users, we can limit it.
I am a mechanical engineer and you can contact me both here and on my email: [Bleep] edit moderator: use mps and not put private emails in public

 

[Kattivo83]

hi mauro, I am pleased to hear your words since I also consider it a great product!
for the rest, I repeat, I use it for more than ten years (at the time it was vx 8.6!), so, without presumption, if I can be of help you find me here.

 

[dog40]

Good evening,
hello kactive83 feedback at the moment 2 cows in the cam:
I can't do a new operation while I'm calculating the path of another
I can't calculate the residual raw of a processing if not doing the simulation (i.e. wait for the program to make the tool on the whole path created in the procedure)
Do you give me all this or am I able to use it little?

 

[Kattivo83]

I will try to be exhaustive. I suggest that the calculation of 3d tool paths has always been optimized for operations called "quick mill". is in fact in those operations that the software expresses the maximum of its potential as cam. That said, if memory does not deceive me, it is from version 12 of the deceased vx that introduced the batch calculation function: using that option the software calculates in the background the tool path leaving the free interface to be used for anything else, not only calculate other operations but also, for example, work on other files! for those who use the operations defined 3x nurbs, well, in 10 years I never had to use them.for what concerns the second point, there are two types of simulation: the animated one (which I suppose is the one you use), and the rapid (see only the result, is less defined, but you can increase the resolution of the residual crude). available if you need anything else or if I wasn't clear. p.s.: 1- read pm. 2-what version do you use? so I can be clearer in giving you directions.

 

[dog40]

kactive83 thank you for the availability shown. very useful... I test the product these days is we see if it will hold the comparison with the software we use in the company: toptron and