transparent parts

[bladina]

Hi.
I bought a new pc equipped with picture graphics card k2200, after reinstallation of solid edge st3 when I open a part or a set these show only in transparency. I don't understand.
Thank you.

 

[vespa_83]

obviously check if you have wireframe or shaded display.
download and install the latest video card driver (mal does not).
You should check on the dedicated web page if the card is on the list of compatible cards.

 

[bladina]

obviously check if you have wireframe or shaded display.
download and install the latest video card driver (mal does not).
You should check on the dedicated web page if the card is on the list of compatible cards.

Hi.
....of course controlled
... the card is on the certificate list
... drivers should be updated
:confused

 

[bladina]

solved.....after installing the 12 mp...:wink::tongue::redface:

 

[cacciatorino]

solved.....after installing the 12 mp...:wink::tongue::redface:

but did you install them all one by one in sequence? :wink:

 

[bladina]

but did you install them all one by one in sequence? :wink:

......I started from...... 12 to go down::biggrin::wink:

 

[Be_on_edge]

......I started from...... 12 to go down::biggrin::wink:

each mp also contains the previous ones, once installed the 12 there was no reason to install the others too.

Hi.

 

[bladina]

each mp also contains the previous ones, once installed the 12 there was no reason to install the others too.

Hi.

:biggrin::biggrin: it was a joke.. .
Thank you