repair and solidify stl

[Shotfree]

Good morning to all,
I have a question for you guru of creo, they sent me a model in stl derived from a 3d scan, I would need to turn it into solid to quote it and make some checks, using creo 3 memory that there was a subprogramme to try to repair mesh then solidify them, but in creo 5 I can not find it. However, I did not know how to use it well in the previous versions, I ask those who have more experience in this type of work, even better if they have a guide, to help me understand how to put their hands on these models and make them accessible.
Thank you for your help!

 

[AndreaTerzi]

Good morning, the subprogramme is import date doctor. try to select import management and do edit definition. you should open the interface x access idd. then there is the possibility of automatic correction.

 

[freexf]

stl is a manageable face format with reverse engineering.
other solution export to packaging.

 

[Shotfree]

stl is a manageable face format with reverse engineering.
other solution export to packaging.

I tried, but 3d scanning has open parts, so I create not export, unfortunately those who thought the sw did not consider appropriate a method of self solution for open faces. thanks anyway for the answer.

 

[Shotfree]

Good morning, the subprogramme is import date doctor. try to select import management and do edit definition. you should open the interface x access idd. then there is the possibility of automatic correction.

but this directly in creo?

 

[freexf]

reverse engineering is a module with many commands to rework the faces.
not the usual idd.

 

[Shotfree]

reverse engineering is a module with many commands to rework the faces.
not the usual idd.
View attachment 56711

but is it another sw or opens from inside creo?

 

[freexf]

auqndo do change definition of facet feature brings you them
but need a license

 

[Shotfree]

auqndo do change definition of facet feature brings you them
but need a license

ok, if you select change definitions I see this:
At this point I think I don't have a license for that form.

 

[freexf]

the commando made near pause is disabled
License form.

 

[Shotfree]

the commando made near pause is disabled
License form.

Unfortunately it seems I miss the license! However I thank you equally for the availability and time

 

[320i S]

I tried, but 3d scanning has open parts, so I create not export, unfortunately those who thought the sw did not consider appropriate a method of self solution for open faces. thanks anyway for the answer.

paradoxically I had more problems with automatic resolution programs, than with the date doctor.. .
is it longer with the datadoctor?, yes; there are problems then with the math solved?, no and if any other problem comes out, just go back inside and resolve.

 

[Shotfree]

paradoxically I had more problems with automatic resolution programs, than with the date doctor.. .
is it longer with the datadoctor?, yes; there are problems then with the math solved?, no and if any other problem comes out, just go back inside and resolve.

ciao @320i s , the problem I have is first of all the license (until 3 I had no problem opening the doctor, now I do not see it anymore, but this is a problem I will try to understand), then I do not know how to use the tool, and this complicates things very much. automatic resolution can be useful in some cases, for example in my having only need to quote the detail enough and advance.
However to benefit of anyone who has my own problem, playing with import settings, I then managed to export shrinkwrap.
I hope I can break the boxes as soon as possible for a few tips on the use of the doctor .
I thank you for the answer.

 

[freexf]

import data doctor is only available when it comes to surface geometry.
shotfree, you've got faces. for facets it takes reverse engineering and not date doctor.