• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

presentation new users solid edge

  • Thread starter Thread starter cacciatorino
  • Start date Start date
Hi.
My name is a tree carlo and I'm a mechanical engineering student.
I always used solid edge, but at a fairly basic level.
 
Hi.
I graduated in mechatronics, at the beginning of my work experience I used in a basic way proe for a small project, now after about 8 years I changed work and I will have to "return" to mechanical design using solidedge.
 
hello to all I am responsible for a finnpower punching machine from 20 loading and unloading tools. I know with jetcam and I would like to learn a solid edge cad software.
 
hello to everyone, I'm an accountant lent to the technical office. I use solid edge from v19, autocad and draftsight in 2d and for a few years I used cam punch/linea5 software and sigmanest.
 
hello to all I am lorenzo
just inscribed to this forum. I am from the province of ancona.
work at a mechanical design office. we work for most customers with solid edge, but also with solidworks and creo.
we also make renderings and we recently develop and produce prototypes in 3d printing.

Good day to all
 
Hello everyone
I am andrea and I am a mechanical designer and production manager in a company that deals with automatic machines.
cordial greetings
 
hello to all designer friends! they are greedy and come from Abruzzo but work in cesena as a mechanical designer in a startup. I have been using for several years but in the last period I am switching to solid edge for reasons of compatibility (with no few difficulties). synchronous modeling fascinates me a lot but I still can't master it. . .
 
DavideDav said:
hello to all designer friends! they are greedy and come from Abruzzo but work in cesena as a mechanical designer in a startup. I have been using for several years but in the last period I am switching to solid edge for reasons of compatibility (with no few difficulties). synchronous modeling fascinates me a lot but I still can't master it. . .
Click to expand...
welcome davide, I am also of cesena (y)
 
hello to everyone, I'm diego and I'm 30. currently design and design trucks of firefighters, to better tell the setups (aeroplane platforms specifically) for an Austrian company. I use solid edge 2019 (which I still do not digest), in the past I used ptc creo direct modeling and I designed pneumatic manipulators, at the dawn I used only the good old autocad 2d (which I always regret) and I designed machinery for material transport and inerts.
 
Hello, my name is seb, I am currently working on solidedge in a study office in the region of bordeaux en france for 13 years. I design aeronautical support and maintenance capabilities. Before that, I worked subcontracting for the automotive industry on catia, and autocad.
 
hello to all, I am giorgio and are struggling with solidedge for the first time.
the new job leads me to use this software, while in my ten-year asperience I snagged between inventor and solidworks.
I hope in the future to have your help. Greetings to everyone.
 
hello to all I am going, I am a technical designer and designer for a company of doors. I grew up with autocad, then worked for 3 years with solidworks in the field of light mechanical carpentry and for just less than a year I am struggling with solidedge.

greetings
Andrea
 
good evening to all, I take care of mechanical design, an activity that I think is seriously fun.
use mainly solid edge, ptc and especially head (or at least I try).
I hope to be of help and to be helped.
 
Good morning to all,
new solid edge but historically autodesk bim user.
patience for sometimes absurd questions. I will try to return....you will go to heaven.
 
Good day to all.
I am a mechanical designer at a big company in the glass industry. I am expert industrial specialization electrotechnical and use solid edge since 2003 about , I think I started with v12...... now I use st10. for some time I used unigraphic now nx
 
hello to all, my name is Andrea, aerospace engineer, work in the cable system industry, I used autocad, solidworks, inventor, nx, now for the company where I work we are going from autocad to solid edge.
greetings
Andrea
 
Good morning to all, my name is diego and recently I started using this beautiful software. I joined this community to read your discussions and ask for some doubt about it.
good work to all,
disability
 
hello to all, my name is marco and I joined the forum to try to learn and improve myself in solid edge, unfortunately I am at the first weapons, my workshop wanted me to be self-taught to learn to draw, since our mechanical designer if not gone.
by now it is from a year that delights me in the design of some mechanical pieces that we need in our company. All in all is going well, even if in the phase when I go to make the cartilage I have many gaps, that I would try to understand where I am wrong or where I was wrong in the table.
thanks and good work to all
Mar
 
hi to everyone, I am freed, I discovered the forum because I see it very active and with many members of experience and it is what I need to solve problems quite "annidati". ...
After graduation of geometra I studied as an industrial designer using different 3d software and render, rhino, 3dsmax, keyshot and solidedge.
I now work in the technical office of a company producing refrigeration machines using solidedge for 5 years now.
I hope to help and solve in my turn the criticalities that I respond with the software.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 20 (members: 0, guests: 20)
Back
Top