Nibbio4
Guest
a greeting to all, embellished by rhymes.
user created for 20 years and now passed to solidedge st10
user created for 20 years and now passed to solidedge st10
Be_on_edge
Guest
It's always a pleasure to meet new users.
greetings from a cesenate :lol:
Stefano_3D
Guest
Greetings to everyone, stefano di rimini.
solid edge user for about 15 years, I have been working on mechanical design in particular machine tools for light alloys.
solid edge user for about 15 years, I have been working on mechanical design in particular machine tools for light alloys.
biz
Guest
But, uh, unfolded or employed?
TiZeta
Guest
hello to everyone, I've been following you for a long time but I haven't introduced myself before.
I started with autocad lt98 in the far '99 in building design, now use solid edge and are employed at a metalmechanical company in Belluno.
I started with autocad lt98 in the far '99 in building design, now use solid edge and are employed at a metalmechanical company in Belluno.
Sedgewick
Guest
Bye to all,
I started following the forum a few days ago. I would like to learn how to write macro for solid edge to improve company internal practices (mechanical design company).
I started following the forum a few days ago. I would like to learn how to write macro for solid edge to improve company internal practices (mechanical design company).
Strego
Guest
Good morning to all,
I'm stunned and I'm a mechanical engineer. work as a designer for a company engaged in methane compression and oil&gas. we use solidedge as a reference sw.
I'm stunned and I'm a mechanical engineer. work as a designer for a company engaged in methane compression and oil&gas. we use solidedge as a reference sw.
Cristian P
Guest
Hello everyone,
I'm cristian, I just got to know about this forum.
work in a metalmechanical company and recently I was inserted in the technical office: use the
solid edge to draw some internal equipment and especially for the company layout.
I'm cristian, I just got to know about this forum.
work in a metalmechanical company and recently I was inserted in the technical office: use the
solid edge to draw some internal equipment and especially for the company layout.
ABarangani
Guest
Good morning
I am a new user of this forum. My name is gorea and I live and work in Ferrara.
work in a technical office at a metal company. I did a solidworks chord but now in the company I am using solid endge
I am a new user of this forum. My name is gorea and I live and work in Ferrara.
work in a technical office at a metal company. I did a solidworks chord but now in the company I am using solid endge
Adomorn
Guest
Hello my name is antonio, from the province of foggia, are geometra, use autocad for almost 20 years, mainly in the construction field, I have had experiences in plans of air channeling, and interior decor working with rhino and vray, currently I am involved in civil and naval furniture in stainless steel and I am here to give you trouble with solid edge that I started to use recently
Alba_007
Guest
Hello I am tree-lined I have an excellent experience in creo and good in inventor.
I was baptized as a "prezzemolino" (I go well with everything) and, despite having just started a solidworks job, a solidedge contract came in.
same desinence ("solid*"), but different shades.... what fatigue.
and of course thanks www.cad3d.it
I was baptized as a "prezzemolino" (I go well with everything) and, despite having just started a solidworks job, a solidedge contract came in.
same desinence ("solid*"), but different shades.... what fatigue.
and of course thanks www.cad3d.it
SCUBENDURO
Guest
Good morning to all, after a long time since registration I introduce myself.
work with solid edge from v7 version since 2000 I believe! !
Unfortunately for personal laziness and my customers I continued to work with the old versions. . .
I have all the updates but work with st9!!! and not so long
work with solid edge from v7 version since 2000 I believe! !
Unfortunately for personal laziness and my customers I continued to work with the old versions. . .
I have all the updates but work with st9!!! and not so long
Taso
Guest
Bye-bye, everyone. I'm hot.
I have a three-year degree in mechanical engineering and from 2007 to today I have worked in 5 engineering companies in various sectors. the current one produces single screw pumps.
I currently use solid edge but in the past I also used inventor.
I have a three-year degree in mechanical engineering and from 2007 to today I have worked in 5 engineering companies in various sectors. the current one produces single screw pumps.
I currently use solid edge but in the past I also used inventor.
RoBEERto
Guest
Bye-bye, everyone. I'm rude.
I worked for 10 years in the metalworking workshop, then I went in ut and began to use creo elements / direct modeling for a total of 5 years, now instead I am looking, from about a month, to make friends with solid edge,
I worked for 10 years in the metalworking workshop, then I went in ut and began to use creo elements / direct modeling for a total of 5 years, now instead I am looking, from about a month, to make friends with solid edge,
prince22
Guest
Hello everyone, harminder.
I have a three-year degree in mechanical engineering and since 2016 I work to date for a company that works sheet metal.
I currently use solid edge but in the past I also used solidworks.
I have a three-year degree in mechanical engineering and since 2016 I work to date for a company that works sheet metal.
I currently use solid edge but in the past I also used solidworks.
Capo_bastone
Guest
good morning, I am a designer of industrial plants for transport and dosing powders, work since 2016, I currently use solid edge and I have been following the forum for more than a year to make the most of if seen that on the net there is little stuff
Antomasi
Guest
hello to all, my name is antonio and desio dress and I am an old solid edge user. I was working in technical office and designing locking systems (seers). I am now retired and I continue to enjoy with solid edge and 3d printing to spend time.
Shotfree
Guest
Good morning to all, my name is fabio and I have been working for over 20 years of design and design. I recently installed solid adge commynity to evaluate and study the product. I use very well ptc I create and well solidworks 2023; now I have decided to try this new challenge to understand how effectively this tool could represent a valid alternative to these platforms within the framework of design.
Mattech
Guest
Good morning to all, my name is matteo.
I have been working as a designer at a metal company, and I have been following this forum for a long time to increase my knowledge, and I would also like to contribute a minimum to this site.
I currently use solid edge st9, but I also have a previous experience with solid works and I create
direct / modeling.
I have been working as a designer at a metal company, and I have been following this forum for a long time to increase my knowledge, and I would also like to contribute a minimum to this site.
I currently use solid edge st9, but I also have a previous experience with solid works and I create
direct / modeling.