spring bars with thread

[francesconappowork]

Hello friends
Does anyone know where to find spring bars like this about 30 mm with final thread?
Thank you.

 

[TETRASTORE]

You can try qui e qui.

 

[francesconappowork]

You can try qui e qui.

Well... Thank you, but I need springs of no more than 35 mm .. and certainly not to 3 or 400 euros

 

[PIETRO2002]

If maybe you're more accurate in your request, you can get more targeted information, we're not guessing!

 

[francesconappowork]

I put a photo, text and measurements for the request those are the clips, I look for them only with final thread.
but possible that can look for a spring that costs 400 euros per piece (about 35mm)?
which strap carries on a spring of 3 or 400 euros?
if a rolex brings one from about 9 euros to the public.
Come on!

 

[TECNOMODEL]

I put a photo, text and measurements for the request those are the clips, I look for them only with final thread.
but possible that can look for a spring that costs 400 euros per piece (about 35mm)?
which strap carries on a spring of 3 or 400 euros?
if a rolex brings one from about 9 euros to the public.
Come on!

your attitude, frankly, irritating and unrespectful of those who are devoting their time to trying to "help" colleagues.
as in the other discussion you opened you ask without giving information, openly criticize the ideas that are launched and you have a tone for which it seems we are all stupid and you the only one with the truth in your pocket.
Since you know so much as you need to ask for help here, then...

 

[PIETRO2002]

your attitude, frankly, irritating and unrespectful of those who are devoting their time to trying to "help" colleagues.
as in the other discussion you opened you ask without giving information, openly criticize the ideas that are launched and you have a tone for which it seems we are all stupid and you the only one with the truth in your pocket.
Since you know so much as you need to ask for help here, then...

Wooow, I'm paying you a beer for this answer, I wanted to do it, but you preceded me! :

 

[TECNOMODEL]

Wooow, I'm paying you a beer for this answer, I wanted to do it, but you preceded me! :

I accept it more than willingly

 

[francesconappowork]

sometimes gi admin take the brigade to read a whole conversation starting from the mother post. and often know how to disconnect a serious person from some keyboard bully.
I hope so in this case.
In all cases, I don't have time for bully issues.
I could solve those vis a vis, but this is not the right place.
I thanked in the post before any response.
I hope there is in this group someone who has passion like me for some things and who especially does not adopt as a daily sport that to virtually bully people who work hard.
a greeting to all persons of good will

 

[TETRASTORE]

I put a photo, text and measurements for the request those are the clips, I look for them only with final thread.

ciao @francesconappowork, I would like to point out that with general and approximate requests there is a risk, as has happened in this case, of having imprecise answers. If you had placed an image similar to what I attach, specifying that they were for a rolex, maybe you would have received more answers with directions more adhering to your needs.
However if you do a search with: rolex screw pins bands 30 mm lenght you will get a myriad of results that you can filter, although I think 30 mm is a not too common measure.

 

[PIETRO2002]

sometimes gi admin take the brigade to read a whole conversation starting from the mother post. and often know how to disconnect a serious person from some keyboard bully.
I hope so in this case.
In all cases, I don't have time for bully issues.
I could solve those vis a vis, but this is not the right place.
I thanked in the post before any response.
I hope there is in this group someone who has passion like me for some things and who especially does not adopt as a daily sport that to virtually bully people who work hard.
a greeting to all persons of good will

without wanting to argue or make the keyboard lion, I point out that even your attitude, in the other post you opened reflects your way of doing, to precise questions you receive targeted answers!

 

[francesconappowork]

ciao @francesconappowork, I would like to point out that with general and approximate requests there is a risk, as has happened in this case, of having imprecise answers. If you had placed an image similar to what I attach, specifying that they were for a rolex, maybe you would have received more answers with directions more adhering to your needs.
However if you do a search with: rolex screw pins bands 30 mm lenght you will get a myriad of results that you can filter, although I think 30 mm is a not too common measure.

I am sorry but I see that in this group the average is that (I really get bored to answer).
I never asked for rolex or watch clips. I don't even wear watches.
you have a repressed anger, ignorance and mediocrity that is less than just the stupidity of admins who administer you
and with this I wish you to find many good psychologists on your way. You need it urgently. you and the admins of this lemur.
because the manure.. is generated by the lack of education, ignorance and lack of mental health.
I'll never do it!

 

[Mario SJPD]

adios

 

[cacciatorino]

user banned for ten days, closed discussion.