add properties to a .sldlfp file

[pose63]

on the description field can I make the configuration name appear?

I didn't find the way.

View attachment 67889

Nome file nel riepilogo informazioni

Ciao a tutto, ho provato ad inserire nel riepilogo informazioni in un campo da me creato la sintassi "SW-File Name", ma in nome file ovviamente nel campo Risultato non mi esce il nome file, se clicco sull'elenco a discesa si presentano un po di opzioni, ma non ce il nome file Qualcuno sa se e...

www.cad3d.it

 

[Esselle]

per

si

I do not want to insist, but if in the excel created by solid in which I configure the quotas I try to put as the name of the column "description" the software says that it is not possible.

 

[Esselle]

Nome file nel riepilogo informazioni

Ciao a tutto, ho provato ad inserire nel riepilogo informazioni in un campo da me creato la sintassi "SW-File Name", ma in nome file ovviamente nel campo Risultato non mi esce il nome file, se clicco sull'elenco a discesa si presentano un po di opzioni, ma non ce il nome file Qualcuno sa se e...

www.cad3d.it

thanks to the solution is precisely this insert in the properties to the description line the name of the written configuration as seen in the attached image.
It should be all right.

I would use the files created with the profiles, opening them, choosing the configuration you need and then saving with name by entering the appropriate part code, so as to leave a "master" file in the library to be used.

 

[Esselle]

mi smenstisco da solo.

questo:
"I would use the files created with the profiles, opening them, choosing the configuration you need and then saving with name by entering the appropriate part code, so as to leave a "master" file in the library to be used. "
so it is not good, you have to create the sldlfp file to be able to then use it as a structural element.

 

[MassiVonWeizen]

You know I don't understand anything you're doing, you did and you want to get it. .

 

[Esselle]

It is certainly not clear to you because everything comes from my mistake, that everything is, less than a solidworks expert.
reassurance:
I had to add properties to existing parts files and assemblies and I also updated my templates.
I mistakenly thought I had to add the properties to the sldlfp files I use for the structural profiles. this operation I then realized that it was superfluous because the old files that use sldflp already have additional properties and new will be born from an updated template.
during the discussion came the speech of creating a library with configurations and I definitely married the convinced idea of the benefits.
between the difficulties there was to connect the description property with the configuration name and I arrived at a solution.
the only problem I have left is to create the sldflp library file with configurations to be used as a structural element.
I hope I could explain.

 

[MassiVonWeizen]

I still do not understand what the properties of the sldlfp file that are propagated to the distinct cut with the properties of axiemi file and parts?

 

[Esselle]

I still do not understand what the properties of the sldlfp file that are propagated to the distinct cut with the properties of axiemi file and parts?

I thought it was wrong that there was a relationship.

 

[MassiVonWeizen]

the only problem I have left is to create the sldflp library file with configurations to be used as a structural element.

create them like all configured files, the only shortness is that the file location, as I have already written in the discussion that I linked you, should not be inside a subfolder as in the classic profiles, but in the main folder.
so if the unconfigured profile you have it in "solidworks/profiles welding/angular/505x5.sldlfp" the configured profile will have to be in solidworks/profiles welding/angular.sldlfp"

 

[Esselle]

create them like all configured files, the only shortness is that the file location, as I have already written in the discussion that I linked you, should not be inside a subfolder as in the classic profiles, but in the main folder.
so if the unconfigured profile you have it in "solidworks/profiles welding/angular/505x5.sldlfp" the configured profile will have to be in solidworks/profiles welding/angular.sldlfp"

Yes, it is clear, the problem is that I mistake something and solidworks returns me a mistake. I take exactly what happens to me on Monday. thanks for the support.

 

[re_solidworks]

for

I do not want to insist, but if in the excel created by solid in which I configure the quotas I try to put as the name of the column "description" the software says that it is not possible.

in the library I created, I command the graphics from the excel table as it suggests massive. in column header you have to write $prp@ in front of propitiation

 

[Esselle]

Yes, it is clear, the problem is that I mistake something and solidworks returns me a mistake. I take exactly what happens to me on Monday. thanks for the support.

I was obviously wrong with some procedure.
At this point I can create, thanks to your indications, a library with configured profiles.

 

[Esselle]

in the library I created, I command the graphics from the excel table as it suggests massive. in column header you have to write $prp@ in front of propitiation

I didn't know, thank you. I made up the configuration name.