conversion to .step or .iges files

[baroniojoe]

good morning, could someone convert me this file catia v5 in .step or .iges format?
I'm using solidworks and resigned the use of catia v5.

thanks in advance,
Joe

 

[Vittorio]

ciao
allego step

 

[baroniojoe]

ciao
allego step

thanks vittorio
i already got out of work tomorrow i try to import the step file. of course i hope i have no problem with my solid a little dated anyway i thank you so much for the kindness

 

[baroniojoe]

Thank you! Imported .step file correctly, I can take advantage of your kindness to ask you the conversion of this file as well.

Thank you in advance,
Joe

 

[agerica]

Thank you! Imported .step file correctly, I can take advantage of your kindness to ask you the conversion of this file as well.

Thank you in advance,
Joe

ciao

 

[Vittorio]

Thank you! Imported .step file correctly, I can take advantage of your kindness to ask you the conversion of this file as well.

Thank you in advance,
Joe

ok fatto
ciao

 

[baroniojoe]

ok fatto
ciao

Thank you very kind!

 

[baroniojoe]

victorious good evening,
Would you kindly check if in the convert file in step 2 in catia version there is a rotation extrusion function to be suspended? I would need the step with the same geometry as the previous file. extrusion usually at the end of the file served to see the ingombs in rotation.

Forgive me for this further ailment, but not knowing how the files are and having no more catia v5 I can only support the forum.

Thank you.
Joe

 

[Vittorio]

victorious good evening,
Would you kindly check if in the convert file in step 2 in catia version there is a rotation extrusion function to be suspended? I would need the step with the same geometry as the previous file. extrusion usually at the end of the file served to see the ingombs in rotation.

Forgive me for this further ailment, but not knowing how the files are and having no more catia v5 I can only support the forum.

Thank you.
Joe

It's okay.
you must bear patience until Monday
I will send you the screenshot of the tree and you will tell me what I have to suspend to make the step

 

[Vittorio]

victorious good evening,
Would you kindly check if in the convert file in step 2 in catia version there is a rotation extrusion function to be suspended? I would need the step with the same geometry as the previous file. extrusion usually at the end of the file served to see the ingombs in rotation.

Forgive me for this further ailment, but not knowing how the files are and having no more catia v5 I can only support the forum.

Thank you.
Joe

Hi.
tell me what function I have to turn you off

 

[baroniojoe]

Hi.
tell me what function I have to turn you off
View attachment 69847

Good morning victorious,
Thank you! try to disable all the working in rotation, should remain the fan with 5 blades.

 

[Vittorio]

Good morning victorious,
Thank you! try to disable all the working in rotation, should remain the fan with 5 blades.

I don't see the fan

 

[baroniojoe]

I don't see the fan
View attachment 69848

then I think the file is different from the previous one and is not usable.
thanks for the precious availability.

 

[baroniojoe]

Good morning victorious. ,
after a deeper search I found these 3 files. Can I try to ask you to convert these 3 files as well? thanks in advance

 

[Vittorio]

Good morning victorious. ,
after a deeper search I found these 3 files. Can I try to ask you to convert these 3 files as well? thanks in advance

 

[baroniojoe]

Thank you very kind!

 

[baroniojoe]

Good morning victorious,
How are you? I allow myself to give you this time, considering the number of favors asked recently. Today I write again because I needed to reexume some dated files.
Can I still ask you a kindness?
I would need to turn these files into 3d .step or 2d .dxf
If you can, I'll leave the files attached. Besides, if you could do something for you do not hesitate to ask ... thank you in advance
Joe

 

[Vittorio]

ciao Your emails done

 

[baroniojoe]

Thank you. @vittori !

 

[baroniojoe]

Good morning @vittori ,
The last for today I promise!
: