assembly instructions lego model.

[MassiVonWeizen]

Yes, yes, he's in charge, but there's nothing

copia questa stringa in un motore di ricerca
forum.solidworks.com/thread/46719

 

[CLY75]

Nothing, I still couldn't color the piece in explosion

 

[MassiVonWeizen]

At least I said if you could see the link... Let's guess and hypothesize it

summary
the passages are quite simple
in the default configuration create the various phases of explosion (we hypothesize 4)
later create 3 new configurations (more than default do 4)
these steps must be repeated for each phase:
1 Keep default configuration enabled
2 selections the second phase exploded
3
4 selections the second configuration
5
repeat for n phases
6 in the first configuration delete all phases of explosion you copied

create 3 new display states where you will set the items as you need
activate first configuration and first display status
activate second configuration and second display status
repeat for n phases

control from one configuration to another

 

[CLY75]

I didn't manage to make the configurations, I attach the file where there is an example set inside. If you want to work on it so maybe seeing it I can understand.

 

[MassiVonWeizen]

Of course it does not work, there is only one configuration (default)you have to create an explosion phase configuration

 

[MassiVonWeizen]

as from image

 

[MassiVonWeizen]

But be careful that the situations 02 and 03 cannot get them as in the 1 where you made the view of the red cube in shady mode and that of the cube emptied in removing hidden lines; in view 02 and 03 you will have to make a single view and if you impose it in removal mode hidden lines, as you did, you will not see the red color of the cube; you must therefore use the shaded mode and consequently you will see the color of the empty cube (in this case it is white so I don't think it is a problem, but if you use other colors it wouldn't be good)

 

[CLY75]

I saw, handing us a little over, that in the part of the 3d and not on the table, if I click with the right on a component, in the drop-down menu appears the item "display component"where in the under menu you can choose a type of display of the individual detail.
the display of this component in the set, attaches to the selected display status indifferently if it is located or not in explosion state.
This method avoids all the configurations copied for n configurations.