autocade structural detailing 2012 e graitec advance steel

[BIMchecker]

This means that the 2012 version can be used as an autocad or standalone application. the user can choose this possibility and the file that generates are 100% compatible with both versions.

the price list of the top version is the premium one is about 9000€

Hello vannitrevisan I did not understand a couple of things

the price you have indicated refers to the version that requires the installation of autocad or to the standalone version?

Does the two versions have the same price?

 

[vannitrevisan]

the version is the same!!!
there are no differences!!!! if you have autocad install on autocad otherwise standalone or both!!
the cost is the same because the 2012 version is unique!!!

 

[BIMchecker]

the version is the same!!!
there are no differences!!!! if you have autocad install on autocad otherwise standalone or both!!
the cost is the same because the 2012 version is unique!!!

Hello vannitre

I did not want to question what you said, mine was just a curiosity because it seems strange to me that the price is the same as for the standalone version they had to invest many resources for the development of a 3d graphic engine and for that 2d for the drawings.

I'm obviously wrong.

 

[Tautor]

Many of the software mentioned in the discussion are computing software and not drawing software (for example see robots), some are many dated, others are never taken off, failing to develop and spread. in my opinion the specific cads to consider for carpentry design are only 5:

1. autodesk structural detailing: a discreet modeling product, a bit lacunous in the table, but costs less than competition. in fact with 5'500 euros you get the license of autocad, revit structure and structural detailing. an entry level product

2. teconometal: great for discreet modeling for table putting. It also has full compliance with the Italian profiles, always updated to Italian law. 7'000 euros + 5'000 (autocad license) =12'000 euros. a discreet product.

3. graitec advance steel: great for modeling and putting on the table. still not translated for the Italian language and codes, but still, more than usable. 8'000 euros + 5'000 (autocad license) =13'000 euros. a great product.

4. tekla: excellent for modeling and tableing, perfectly adapted to the Italian language and codes. Longer learning times than previous ones, its independence from autocad brings well-known advantages and disadvantages. 20'000 euros for one of the best products on the market especially for large structures of high complexity.

5. strucad: they refer me great for modeling and putting on the table, is analogous to tekla, but less widespread in our country. cost 15'000 euros.

Hey, gil,
allow me to answer this statement, I take it as a point but I have seen that often there are the prices of technometal and that are wrong, the prices you are saying are relative (excess rounded) to the solution module, which practically allows to make calculation design and verification of the structure and the individual nodes ... practically are 2 software for tecnometal we say that as an alternative would be to take into consideration the price of tekla + mida2000 .

 

[Franchi]

Hey, gil,
allow me to answer this statement, I take it as a point but I have seen that often there are the prices of technometal and that are wrong, the prices you are saying are relative (excess rounded) to the solution module, which practically allows to make calculation design and verification of the structure and the individual nodes ... practically are 2 software for tecnometal we say that as an alternative would be to take into consideration the price of tekla + mida2000 .

Bye-bye

Can you give us a more precise indication of the price of technometal?

 

[Tautor]

Hello, Frank.
technometal bim is divided into modules I can briefly tell you the differences and prices of the various modules, if you want to know some more info you can visit our website or contact me directly
- technometal bim 2d: 2d design of the metal structure, complete with macro to design stairs, towers, sheds ... makes manual marking, prepares distinct materials and constructions- 2.200,00
- technometal bim 4d: 2d/3d design of the metal structure, complete with all macros for stairs, towers, oil-gas platform, sheds ..., automatic marking, distinct materials and construction - 4500,000,00
- tecnometal bim connections: calculation and verification of individual unions - 800,00 - even without autocad.
- technometal bim sa: calculation and verification of both individual unions and of all the structure with internal solutor or with sap2000 - 4500,00
- tecnometal bim solution: all modules of technometal .. with this do practically all design, verification and calculation - 6900,00

learning and maintenance: recommended and effective a calendar course of 2 days (500,00) followed by a possible day of personal training training this is quantifiable from time to time, depends on where it is made ..., while the cost of annual maintenance is 600,00 for 4d and knows, 390 for 2d and connections, 900 for the solution.

I hope I have cleared your doubts, if you want to know anything else in particular you can write here on the forum or in private as you prefer.

Hi.