conversion from inches to millimeters of a part family

[The_Matrix]

The speech is that you underestimate some kind of user.
I'm not one of those users who use nx as if it were ug17.
use nx7 10 hours per day.
I made the cast, I document, read, try and try again, I question my method made 1 month before, after some readings.
I try to make the most of the tool cad and your proposal certainly does not facilitate the work of a designer.
You know what the designer has to do?
design, do not worry about which strategy you use to not be wasting time waiting to recalculate or to which procedure you perform otherwise you do not feel the components.

You know what's new?
Since you know everything... When you write in a thread I don't write.
hello and good life

 

[IPdesign]

I cannot understand why it is so difficult to maintain a discussion in the canons of "constructive" without inevitably extinguishing in writing how good one is in using a tool rather than another.
there is the wrong perception that in this forum you merge the skill of a user from the number of hours spent to use it, how long it is used to study it or worse still from the number of posts you read in the profile.
it seems that there is a smania to always show itself a step higher than others, forgetting that the forum serves to exchange ideas and ways of working.

I want once again to reiterate a fundamental concept: in this forum everyone must feel allowed to post even trivial questions, and I cannot tolerate that there are pseudo phenomena that can somehow intimidate a new user to do so.

I will not tolerate any further replicas as I have just had the opportunity to read, so that I should not close the discussion and delete some messages .

 

[The_Matrix]

I cannot understand why it is so difficult to maintain a discussion in the canons of "constructive" without inevitably extinguishing in writing how good one is in using a tool rather than another.
there is the wrong perception that in this forum you merge the skill of a user from the number of hours spent to use it, how long it is used to study it or worse still from the number of posts you read in the profile.
it seems that there is a smania to always show itself a step higher than others, forgetting that the forum serves to exchange ideas and ways of working.

I want once again to reiterate a fundamental concept: in this forum everyone must feel allowed to post even trivial questions, and I cannot tolerate that there are pseudo phenomena that can somehow intimidate a new user to do so.

I will not tolerate any further replicas as I have just had the opportunity to read, so that I should not close the discussion and delete some messages .

the problem is also related to my role as dt of siemens.
Sometimes it seems that what I say should be absolute best practice and that everyone should do what I say.
in any case put so the discussions become sterile.

 

[IPdesign]

the problem is also related to my role as dt of siemens.
Sometimes it seems that what I say should be absolute best practice and that everyone should do what I say.
in any case put so the discussions become sterile.

I think that your role must be recognised as the right consideration,
Most of the time certain procedures, especially on new versions, are not taken in soderation, so much of a hat to those who allow to expand the horizons; not to mention here certain novelties would not be known if not to games started.

My criticism is addressed only to those who are unable to put themselves constructively.
In this forum we are all welcome, the important thing is to benefit many, and if criticism must be made, that these are constructive, that can stimulate the intervention of many.
who puts himself with blind tones certainly does not help the interlocutor to pose criticism but has only an effect of distancing leaving the arid and sterile discussion as it is with this and so many high.

 

[The_Matrix]

I think that your role must be recognised as the right consideration,
Most of the time certain procedures, especially on new versions, are not taken in soderation, so much of a hat to those who allow to expand the horizons; not to mention here certain novelties would not be known if not to games started.

My criticism is addressed only to those who are unable to put themselves constructively.
In this forum we are all welcome, the important thing is to benefit many, and if criticism must be made, that these are constructive, that can stimulate the intervention of many.
who puts himself with blind tones certainly does not help the interlocutor to pose criticism but has only an effect of distancing leaving the arid and sterile discussion as it is with this and so many high.

I will try to pay more attention to my interventions. :mixed:

 

[matfio]

I think there's a big need for vacation, lately it's been pulling a lot of stress.
If I can hold on to ip, let's stop for a moment... two good breaths... We do something constructive for everyone!:smile:

 

[The_Matrix]

I think there's a big need for vacation, lately it's been pulling a lot of stress.
If I can hold on to ip, let's stop for a moment... two good breaths... we do something constructive for everyone Smile:

How about a nice night party?
... you convinced me...