export text to dxf

[Simone 00]

Good evening,
I ask for information to all.
I create files on solidworks daily and recently I need to insert on the various sheets the article code, unfortunately it is a marking therefore not necessary to make an extruded cut, I need to make therefore a line "2d" without the laser making me a thousand cuts, I simply need a writing on the sheet. In this way I could export my file to dxf already with the marking on the sheet without having to do it on cad 2d. I have no idea how and if you can do it.

I hope you can help me,
I thank you.

 

[falonef]

If I have understood correctly, try like this:

in a 2d sheet write exactly what you need
Export 2d file to dxf
open the dxf and select the text and copy it
go to environment 3d
open the sketcher positions you on the floor you need and insert with glue
realizes groove or extrusion (?) in 3d.

Let us know if it works.
with catia v5 works well

 

[Simone 00]

Good morning.
no surely I explained a little bad, basically I leave in a 3d environment, and I would like to directly insert a text on the sheet with a single line, I don't need to extrude it, I need just to codify the pieces, only that all the fonts I find, have double line say, so the laser will do double the work, and I don't need it.
Can you tell me if it's possible with solidworks?
Thank you very much

 

[falonef]

do the same as described above using a font to your liking.

 

[fgmec]

look in the online guide " using stick characters"

​

 

[Simone 00]

great thanks, I found single-line characters like of simple sans oc but the problem persists, it still exports me in polylinea text and not in single-line, in addition it also exports it badly because sometimes there is a piece of letter or number, other tips?