independent multiple copy

[nicolac]

I wanted to ask for advice... use creo parametric
I wanted to draw a wooden board, this is in a table set, while the parts are composed of wooden strips, they are equal in size, but there are so many about 60, and in some at my pleasure I have to practice a guide plug hole,
the fact is that if I make a series and practical a hole in the component, the hole comes in all the comps of the series, if I glue special with translation instead, it unites the pieces because these strips are all adjacent and high equal.

I'm going crazy, if I want to make so many copies attached to each other without me the only way I do it? Don't I have to save the part 60 times by name and place them all?? ? if there is a fast way? Maybe that part gives me the same name with 1 -2-3 and so on??? ?

 

[maxopus]

the hole you can do in the axieme and propagate it to the components that interest you.
creo doesn't work in multibody in part, you have to get together.

 

[nicolac]

basically, do I do the modifications of the part that I care about together? ?

I could do that for what I have to do. The only thing is, if I open the part, I don't see the hole I did. I thought he was having trouble putting me in the table, I hope I don't find any difficulties for anything else doing this, so now it's the best system!

thank you I took 16 hours to think how to do, between endless copies translated series operaz between compon and another infinity of stuff!!! nice to do the course and teach you from the end without the basics copy paste etc.

 

[maxopus]

if the hole you do it on the list before the assembly you have to create two parts, one hole and the other not, preferably in family table.
if you check the strips and then holes the panel it is right to make the hole together.
you have to reason with the same logic you use in the production process.

 

[Parametric_Ozzy]

thank you I took 16 hours to think how to do, between endless copies translated series operaz between compon and another infinity of stuff!!! nice to do the course and teach you from the end without the basics copy paste etc.

strange because in the basic course, the paste copy and special paste copy is a topic that is dealt in more sauces.. .