new installation i can't choose the cart

[skia51]

Bye to all,
as described in the title of the discussion, on a new computer in the company (I have been working there for a few days and are fixing my post) has been installed solidworks 2016 sp5, now I have inserted the folder with the profiles of carpentry we use and the company cartillas, besides model of cutting disparities etc. but at the time of putting the table the model, solid does not make me choose the size of the sheet in one of the company cartilages, it makes me use only a base cartiglio formed a0.
Maybe there's an opzoine I don't find, I tried with the online guide but I couldn't find a topic.
Can you help me? Thank you very much

 

[New Rider]

Bye to all,
as described in the title of the discussion, on a new computer in the company (I have been working there for a few days and are fixing my post) has been installed solidworks 2016 sp5, now I have inserted the folder with the profiles of carpentry we use and the company cartillas, besides model of cutting disparities etc. but at the time of putting the table the model, solid does not make me choose the size of the sheet in one of the company cartilages, it makes me use only a base cartiglio formed a0.
Maybe there's an opzoine I don't find, I tried with the online guide but I couldn't find a topic.
Can you help me? Thank you very much

you have to direct the software to ''pescare'' the files in their folder.
options>position of document templates. . .

 

[skia51]

you have to direct the software to ''pescare'' the files in their folder.
options>position of document templates. . .

hi new rider,
thanks to the answer,
Can you tell me the exact procedure to follow?
Thank you.
However, once the table began, I can right-click on "sheet format" and dissolving "properties" I can decide which cartiglio to use.
first instead, when I started a new untouched mass, I could choose the cartouche.
I hope I explained.

 

[MassiVonWeizen]

It's not complicated and finding us you could've gotten there by yourself.
1click on instrument menu
2click options (at the bottom of the list)
3clicks on file positions
4in drop down drop down drop down click on document templates
5clicks on add and navigate to the folder where the design model resides
6folds from point 4 by selecting sheet size

 

[skia51]

It's not complicated and finding us you could've gotten there by yourself.
click on tool menu
click options (at the bottom of the list)
click on file locations
in the drop down drop down drop down drop down

Thank you
I will try in the afternoon now they told me to go to a yard,
Thanks again

 

[skia51]

It's not complicated and finding us you could've gotten there by yourself.
1click on instrument menu
2click options (at the bottom of the list)
3clicks on file positions
4in drop down drop down drop down click on document templates
5clicks on add and navigate to the folder where the design model resides
6folds from point 4 by selecting sheet size

Hello Massive
I finally got to try, but the situation doesn't change, at the time of making the table I can't choose the cart.
I think the problem is to search in default models. who has installed has customized part models and together so that the units of measurement are other than the preset ones, perhaps it has modified the design model and for this reason at the time of starting the table opens me that generic cartiglio instead of making me choose which I want.
now how to reimpose default files?
Is there a way? Do I have to download it somewhere?

 

[MassiVonWeizen]

templates must have them somewhere.
exist two design templates: the real model that has drwdot extension and sheet format, reads square with cartiglio, which has sldrt extension.
you can also have drwdot templates with the frames, but it is not practical.
the units of measurement have nothing to do with the fact that you do not find the templates and you do not understand why the shoots are at stake.
the company's templates hopefully suiano managed with a dedicated folder and that this is not found in the solid installation folder; Otherwise the problem is not the change of version, but the lack of organization.

At the time of starting the table opens me that generic cartiglio instead of making me choose which one I want.
now how to reimpose default files?
Is there a way? Do I have to download it somewhere?

and what are these default files? for me, that I don't work at your side, are those that are created at the time of installation and that match with the generic file that mentions.

 

[meccanicamg]

save the computer settings working and copy them to your pc.

 

[skia51]

Bye to all,
eventually decided to reinstall everything.
only so he managed to have the clean design.drwdot file. so at the time of the creation of the table opens the window with the choice of the cartilage, which was previously impossible. to make a test we saved a drawing file1.drwdot in which we decided the size of the sheet and the cartiglio, and as property the type of projection "first angle", and in fact at the time of creation of the table, opens directly that cartiglio without possibility to choose another, for example bigger.
I don't know if it's a bug, or an installation error, did anyone have this problem?

 

[MassiVonWeizen]

have you created file format slddrt?

 

[skia51]

have you created file format slddrt?

Hello Masses,
.slddrt files would be sheet formats with cards, square etc.?
you have created back time and added in the folder containing the various types of cartiglo.
perhaps the error was that of vorler save a .slddrt and instead the .drwdot file was overwritten.

 

[MassiVonWeizen]

in the file location tab the sheet formats are addressed correctly?

 

[skia51]

in the file location tab the sheet formats are addressed correctly?

Yes, the folder is that described the "file position" .slddrt files were added to that folder.

 

[MassiVonWeizen]

attaching image always helps to understand each other better.
first image:
folder containing drwdot model
second image:
folders containing sheet slddrt formats
third image:
window that must appear at the opening of the new drawing file and that serves, by clicking on an empty design area, to change cartiglio format on a drawing already set

 

[skia51]

attaching image always helps to understand each other better.
first image:
folder containing drwdot model
second image:
folders containing sheet slddrt formats
third image:
window that must appear at the opening of the new drawing file and that serves, by clicking on an empty design area, to change cartiglio format on a drawing already setView attachment 50058View attachment 50059View attachment 50060

Hello Massive
I didn't think to attach an image,
the first image, is tutot ok, the models are correctly addressed in the designated folder.
As for the second and third images, they did not appear to me at the time of the creation of the table.
you write in fact that "it must appear at the opening of the new drawing file" to me did not appear as the drwdot file had been overwritten, in practice instead of saving the file in slddrt format, the drwdot was overwritten, and at the time of creation of the drawing opened the modified file.
now the problem has been solved by re-establishing everything
thanks to those who contributed.

 

[Mazzieri]

Good morning to all boys,
Sorry if I reopen this discussion but I need vs help that you are definitely more seized than me.
I'll tell you what happens to me.
I saved in a folder called charts the table.drwdot file. always in the same folder I saved all the various sizes sheets a3,a4 etc with .slddrt extension.
now when I go on new document I see the three icons, part, together and obviously table.
clicking on the table doesn't give me the option to choose the sheet format but I have to do it through: dx key. properties and at that point I see all the sheet formats I created.
previously I had not to do this step and clicking on the table icon went directly to me on the choice of the sheet format.
What did I do?
Please help me.

 

[MassiVonWeizen]

Does any screen appear when the new design starts?

 

[Mazzieri]

Does any screen appear when the new design starts?

I just managed to fix the problem I reported, now don't tell me how I could explain it, but the important thing is that I fixed it all.
Masses, I followed your other conversations here in the forum and I realized that you are very prepared. If I can take advantage of it to ask you more questions.
- confirm that once you create the .drwdot format with the appropriate changes in the system option and ownership of the document so that I can find it in all the sheet formats I created or should I recreate all the formats?
- created and saved a .asmdot format where within the file properties I put a lot of information, there is a way to bring them back in the .prtdot format or do I have to transcribe them all again?
- I created a picture and a cartilage for the a4 format with all necessary connections. if you need to create a larger format how do I optimize it?
Thank you.

 

[MassiVonWeizen]

confirm that once you create the .drwdot format with the appropriate changes in the system option and ownership of the document so that I can find it in all the sheet formats I created or should I recreate all the formats?

system options, as the word itself says, apply to any open document; So if for each template you go to edit them, just make a big mess.
Document options apply only to .dot templates

created and saved a .asmdot format where within the file properties I put a lot of information, there is a way to bring them back even in the .prtdot format or do I have to transcribe them all again?

selections, ctrl+c, open those of the part, ctrl+v

I created a picture and a cartilage for the a4 format with all necessary connections. if you need to create a larger format how do I optimize it?

if you have already created them in the folder as you said above:

always in the same folder I saved all the various sizes sheets a3,a4 etc with .slddrt extension.

 

[Mazzieri]

if you have already created them in the folder as you said above:[/QUOTE]In fact the created formats I received them in inheritance from a previous designer and I would have liked to create one of my own.
the easiest thing I think is to change the existing ones, but if I wanted to start from scratch creating a cartiglio and a pane I was curious to know if there was a way to optimize the aesthetics of an a4 on an a3 etc. etc.

cmq thanks a lot for availability.

I am now trying to build a configuration table to be able to apply on the table. I hope to find something in the forum otherwise I will be forced to ask you again