parametric outtures

[Sandra_ME30]

The lock 15.12.15 11:39

Good morning
I wanted to know if any of you has the need for an application si solidworks that it serves to make the parametric drilling tables with solidworks and do not do as the drilling table of solidworks that every time you open the table "high" changes the drilling depths or erases them, that palliate the holes and that remain parametric, in the sense that if I delete the hole n° 3 I do not enlist all
we tried solidil but without having a benefit, indeed worse...
I ask you if you have any knowledge of any program that supports this type of work

 

[Sandra_ME30]

jenuary 15.12.15 11.53

Hello, Luky,
If I don't understand badly you would like a static table, that is, that doesn't update the model changes.
over the years I have seen and tried more cad, I can say that solidworks has an extra march at the level of the drilling table, and it is very beneficial the fact that it is dynamic, it avoids you big mistakes in the editing phase and you do not have to do it again.
Obviously if you personalize calloutformat.txt according to your standards, the table becomes a very useful tool.
I probably didn't understand why you asked me, you could give me your reasons.

Good day

 

[Sandra_ME30]

The lock 15.12.15 12:09

originally written by jenuary view message
Hello, Luky,
If I don't understand badly you would like a static table, that is, that doesn't update the model changes.
over the years I have seen and tried more cad, I can say that solidworks has an extra march at the level of the drilling table, and it is very beneficial the fact that it is dynamic, it avoids you big mistakes in the editing phase and you do not have to do it again.
Obviously if you personalize calloutformat.txt according to your standards, the table becomes a very useful tool.
I probably didn't understand why you asked me, you could give me your reasons.

Good day

Hi.
Meanwhile thank you for the answer, I explained badly. I would very gladly use the solidworks hole table but we saw that:
the ball if I remove a hole will renumber all the holes and I do not want it because the programmers of the machine tools are forced to remake the program.
Every time I open the table, I change my visualization in the tables, in the sense that sometimes it shows me a depth of a lamatura, the next time I don't put it on the table.
you would explain what calloutformat.txt is in solidworks, we have 2014

 

[Sandra_ME30]

mammals 15.12.15 12:12
calloutformat.txt

 

[Sandra_ME30]

The lock 12:15.

Got it.
but is the caption possible to put it in the table?

 

[Sandra_ME30]

mammals 15.12.15 12:27

what appears in the description is the caption

 

[Sandra_ME30]

jenuary 15.12.15 12:29

removing the tick in the table document options, as in the image, you can choose not to automatically update the labels, so they add below.
calloutformat.txt, as shown by massivonweizen, is a customizable text file that solidworks goes to read while creating the drilling table.
during this phase, the line of the description of the single hole, is composed of the variables of the hole you chose, in addition to the static text that you can add between them.

It's a very powerful thing, I use it very much, even because pointing to calloutformat files several times at a time, you can create the table with the words in English, German, etc., or hybrid.
if over time you also customize holes in the hole database, for example you can create spring holes, exhaust holes, precise h7 holes, plug holes, etc., here is that the table through the calloutformat becomes a tool to which you can not give up, because it is error proof.

Hi.