revit- window in continuous facade

[net]

Good morning.
I have a problem with the continuous facade: I have a building where one side of the façade is largely a continuous facade. this continuous façade has opening parts with doors and windows. for the doors I had no problem because I replaced a panel with the family "continuous door-sided", I do not find the equivalent family of the window suitable to the continuous facade.
where to find or how to create a window that can be hosted by a continuous facade?
thanks in advance

 

[terri87]

new --> family --> metric window - continuous façade

 

[net]

Yes, I have seen, but opens a white sheet with in the plant indicated the axes and the outside. how to draw the window? Should I draw line by line of the fixture? I hope there's something faster

 

[terri87]

I usually leave the blank template, so I can customize the windows as I want.
in case you can start from a family of those in the default revit library and adapt it to what you need.

 

[net]

when I open the file "metric-sided window" and try to import a window "from normal wall" it gives me error because I can not import a family...recapturing, I have to:
-open new -> family -> continuous facade metric window
- draw a rectangle giving the size and distances from desired ground
- with the various offsets and lines design fixtures, glass plate etc..
- save and import into the project
- Select the facade panel and change the type by selecting the newly created window that will appear in the list?
Do I have to do this?

 

[terri87]

If the family you want to load is "based on a wall" you don't charge it.
the procedure you described is right, except for the size. the advantage of creating a family of "continuous metric-sided windows" is that this will adapt to the grid of the facade continues on which you will insert it, as well as the height from the ground.

 

[net]

as it happens for the doors that fit the grid! OK thank you very much, I will try to create the window:finger: