ucs rotation from sketch to model

[GianniM]

I have this thing that really drives me crazy.
When I do a sketch, I have a bird oriented in a certain way. When I go out and go in mode part the orientation changes. under explanatory image.

as I hope you understand, while continuing to draw from above the wheel figure of 180° degrees!
and then, whenever I go back in sketch mode, manually I have to rotate the sketch to avoid confusion.

is the problem solved? Is there any setting to set?

:ciauz:

 

[GianniM]

No idea?

 

[Il Mauri]

Is the sketch made on one of the standard 3 floors or on a plan created by you?

 

[GianniM]

Thanks for the answer.
I use one of the 3 standard floors, usually "xz"

 

[Il Mauri]

I have the same problem and I don't know how to handle it. on the plans created by me I can reverse the perpendicular of the plan but on the 3 standard planes this is not possible.

 

[davide75]

Have you tried to look in application options-->part and see how sketch creation is set in one part? ? from me is selected in the x-y plan

 

[GianniM]

If the xy plan selects the xy plan automatically starts the generation of the sketch from the front view, obviously with the rotated planes.
if they select the xz plan automatically starts the generation of the sketch from the view from the top as I like. also in this cascase with the rotated planes.

I imagine that somewhere it is possible to orient the axle towards, but I don't understand how.

 

[Ilario]

is it not that by chance, (maybe even in the template without wanting) have you changed the direction of the cube?
dx key on the cube and "restore front" changes something?

 

[GianniM]

No, nothing changes.
If I fix the cube and then I say "set as high" (I think there's something like that), it's working relatively. but as soon as I go out of the sketch and then go back, I go back with the inverted view.

in this tutorial found on youtube, you notice the abnormal behavior described.http://www.youtube.com/watch?v=_liirtzm-iw

 

[Ilario]

try to disablitate the option "view on plan of the sketch to create the sketch" in application options -> sketch tab.
It's one of the last options, and personally it's an option that has always bothered me so I've always disabled it. . .

 

[GianniM]

I verified that that function turns the auto rotation. disabilitating it is passed in manual so the rotation is no longer wrong because I do it. But I prefer to keep it on. Thanks anyway.

 

[diegus]

Have you tried to change the sketch coordinate system to orientate it as you like?

 

[GianniM]

I don't get any results, maybe I do it wrong