unwanted display of cosmetic fillet in section

[Viollo]

Good morning to all,
I'm writing for a pretty weird problem that came up a few days ago.
during the table of a component, where there are some threaded holes, dissecting a view, I appear the "rigues" of the surface of the cosmetic thread.
of course the section that I am interested does not select the threaded hole, in fact the pre-forum is not displayed, only the lines of the surface are displayed in the middle of the section sampling.
The strange thing is that the section in question is a half section. If I give it the whole classical section, the surface lines disappear as it is right.

Does anyone have already dealt with the problem and know how to solve it?
Thank you in advance!

 

[320i S]

try to:
- Select view levels from the drop-down menu of levels
- expand the cosmetics collector
- Denounce the cosmetic of thread that you don't care and hide
-Save the status of levels

 

[Viollo]

Hey, 320i!
Thanks for the answer.
However, so it actually works, the problem is that they also hide in model 3d, and I would like to avoid.

Thank you!

 

[320i S]

Hey, 320i!
Thanks for the answer.
However, so it actually works, the problem is that they also hide in model 3d, and I would like to avoid.

Thank you!

careful that so you have selected in the levels the model, instead the design and the individual views, have their own levels, derived from the 3d, but independent as visualization.

 

[Viollo]

I don't follow you. .
how do I view the levels of individual views on the table?

 

[320i S]

on the table you can see the tree of the levels, above there is a drop-down menu, where you can select the model, the whole table or one of the views present.
selecting one of these items, "discriminate" their levels, so if you turn off/light the levels, the effect will only affect the discriminating one.

 

[Viollo]

Forgive me, I'm still bothering you. .
in the table, I see the tree of the levels... in the drop-down menu you say, it makes me select or drw (top model) or prt (active model).. but if however select the drw, if I turn on or turn off the levels they display / hide also on the pr...

 

[320i S]

there should be:
- drw
-prt or asm
- Magazine 1
- Magazine 2
...
You have to work on the views.

 

[Viollo]

Forgive me but the views in that drop-down menu are just...
I don't know if it depends on the version or what. .
However I have solved right now like this:
views and details are displayed in the drawing tree. . by clicking with the dx button on the view concerned, there is the option " cosmetic case". That's how it worked out.

Thanks anyway some advice, I was useful to find the solution!
Good day

 

[bigjam]

I also had a similar problem, but if I use " cosmetic case" it is eliminated everything and it is not okay;
I solved it like this:

1. shows the tree of the levels;
2. locate the feature to hide;
3. with the dx key on levels, create a new level to arbitrarily rename;
4. cut the feature and paste it into the new level;
5. dx key on the new level
6. hide hide hide hide

... and the game is done!

probably there will be a less slender way, but this works 100%

 

[bigjam]

I forgot:

7. save the state in sight