liber
Guest
ok for 2008 you can not, but who knows!!! :biggrin::biggrin:
Attachments
Last edited by a moderator:
Ecathe
Guest
have you installed a 32 on a 64?? ?
liber
Guest
the screen speaks for itself and is autocad 2006
everything is cleaning the setup from the lines that refer to the netframework
Ecathe
Guest
What?
liber
Guest
in theory copy the cd/dvd to a system root folder
and start from there installation
copy paste the contents of the 2 files setup.ini here in the forum and I will delete the unnecessary rows to the installation, replace them to yours and you can try to install as administrator, for the moment the only drawback that I found in the simple use of autocad is the non-function of the, I am not cmq dedicated to solving the problem, because mine was just an installation test, cmq around in this forum alone should be more
and start from there installation
copy paste the contents of the 2 files setup.ini here in the forum and I will delete the unnecessary rows to the installation, replace them to yours and you can try to install as administrator, for the moment the only drawback that I found in the simple use of autocad is the non-function of the, I am not cmq dedicated to solving the problem, because mine was just an installation test, cmq around in this forum alone should be more
Tristan
Guest
Liber, you know you're a donkey, right? (No offense :wink: ) autocad 2006 did not exist in x64 version and therefore install it even without making that useless turn. Moreover what you have installed is a civil autodesk 2006 and on civil I give you a good news: try installing the 2010 x86 and you will see it goes on equally, since the first release released for os x64 is 2011.
the only way to install a x86 version on view or 7 64 bit is to open the nose with orca and change the installation package
http://msdn.microsoft.com/en-us/library/aa370557(v=vs.85).aspx
the only way to install a x86 version on view or 7 64 bit is to open the nose with orca and change the installation package
http://msdn.microsoft.com/en-us/library/aa370557(v=vs.85).aspx
Ecathe
Guest
How do you do it for ordinary mortals? I didn't get a snitch!
liber
Guest
I would say to make an earthly attempt from "bean" what I am, changing only the setup.ini
As for the orca you have to turn to a good man as a tristan
What's the cost of zipping the two cd setups.ini and then I see if you can do it? ?
As for the orca you have to turn to a good man as a tristan
What's the cost of zipping the two cd setups.ini and then I see if you can do it? ?
Ecathe
Guest
I don't have them. being downloaded from the autodesk site, it is only one file that once downloaded does everything automatically...it is not divided into files.
However, the problem was "resolved" by downloading the latest version, already 64-bit.
thanks to everyone however for the interest and time spent!
liber
Guest
So apart from that zipped file even if it does everything by itself disappears in a certain folder etc etc., just a minimum of observation, inside this folder and subfolders, there are the setup.ini files.
the forum also serves to this, find solutions to a problem that in theory you could not find more from the assistance because now the version is obsolete and also to many other problems of the job.
returning to the question of installation I can confirm that the 32-bit versions, type autocad 2006 do not install even in an updated win xp operating system precisely for the problem of netframework, not of the updated ones, but of those included autocad 2006
if I in my xp operating system have for example netframework 3.5, during the installation autocad aborts everything giving an error message, because autocad tries to install netframework before that of the so, the lines we say incriminate are in the trivial setup.ini of autodesk, in red those to be eliminated, and with this we pass the service to the great tristan to give us its enlightened opinion
setup_product_names=msi dotnet dotnetlang dotnetsp1 mdac viewer flash acad
setup_startup_message=yes
[PREV_PRODUCT_IDS]
[MSI]
product_name=msi runtime 3.0
install_ignore_failure=no
install_cmd=msi\windowsinstaller-kb884016-v2-x86.exe
install_cmd_args=/quiet /norestart
install_platform=win32
install_upgrade=msi
install_minimal_version=3.0.3790.2538[DOTNET]
product_name=.net framework runtime 1.1
install_cmd=support\dotnetfx\dotnetfx.exe
install_cmd_args=/q /c:"install /l /qb"
install_platform=win32
install_upgrade=.net
install_minimal_version=1.1.4322
[DOTNETLANG]
product_name=language pack per .net framework runtime 1.1
install_cmd=support\dotnetfx\ita\langpack.exe
install_cmd_args=/q:a /c:"inst /qb"
install_platform=win32
install_upgrade=.netlang
install_minimal_version=1.1.4322
[DOTNETSP1]
product_name=.net framework runtime 1.1 sp1
install_cmd=support\dotnetfx\ndp1.1sp1-kb867460-x86.exe
install_cmd_args=/i /q
install_platform=win32
install_upgrade=.net
install_minimal_version=1.1.4322.2032
the forum also serves to this, find solutions to a problem that in theory you could not find more from the assistance because now the version is obsolete and also to many other problems of the job.
returning to the question of installation I can confirm that the 32-bit versions, type autocad 2006 do not install even in an updated win xp operating system precisely for the problem of netframework, not of the updated ones, but of those included autocad 2006
if I in my xp operating system have for example netframework 3.5, during the installation autocad aborts everything giving an error message, because autocad tries to install netframework before that of the so, the lines we say incriminate are in the trivial setup.ini of autodesk, in red those to be eliminated, and with this we pass the service to the great tristan to give us its enlightened opinion
setup_product_names=msi dotnet dotnetlang dotnetsp1 mdac viewer flash acad
setup_startup_message=yes
[PREV_PRODUCT_IDS]
[MSI]
product_name=msi runtime 3.0
install_ignore_failure=no
install_cmd=msi\windowsinstaller-kb884016-v2-x86.exe
install_cmd_args=/quiet /norestart
install_platform=win32
install_upgrade=msi
install_minimal_version=3.0.3790.2538[DOTNET]
product_name=.net framework runtime 1.1
install_cmd=support\dotnetfx\dotnetfx.exe
install_cmd_args=/q /c:"install /l /qb"
install_platform=win32
install_upgrade=.net
install_minimal_version=1.1.4322
[DOTNETLANG]
product_name=language pack per .net framework runtime 1.1
install_cmd=support\dotnetfx\ita\langpack.exe
install_cmd_args=/q:a /c:"inst /qb"
install_platform=win32
install_upgrade=.netlang
install_minimal_version=1.1.4322
[DOTNETSP1]
product_name=.net framework runtime 1.1 sp1
install_cmd=support\dotnetfx\ndp1.1sp1-kb867460-x86.exe
install_cmd_args=/i /q
install_platform=win32
install_upgrade=.net
install_minimal_version=1.1.4322.2032
liber
Guest
probably in the 2008 version the setup.ini to edit are at least 4, the rows and parts probably to be eliminated
[DOTNET20]product_name=.net framework runtime 2.0
exe_path=support\dotnetfx\dotnetfx.exe
exe64_path=support\dotnetfx\netfx64.exe
exe_param=/q /c:"install /qn /l %tmp%\dotnet2_install.log"
vc_func=dotnetvercheck
vc_source=setupui.dll
vc_param=v2.0.50727
vc_description=rilevamento di .net runtime 2.0
diskcost=80000000
[DOTNETLANG]product_name=.net framework runtime 2.0 language pack
exe_path=support\dotnetfx\x86\%lang%\langpack.exe
exe64_path=support\dotnetfx\x64\%lang%\langpack.exe
exe_param=/q:a /c:"install.exe /qn"
exe_langs=1028,1029,1031,1036,1038,1040,1041.1042,1043,1045,1046,1049,1053,20522,1034
ignore_failure=yes
[ACAD]
prerequisite=os;ie;msi;dotnet20;dotnetlang;vba;vbalang;directx;msxml;dwfv;flash;wmf;mdac
[VAULT]Serial=msi;dotnet20;dotnetlang;msxml;wse30;dwgtrueview;designreview;kb907417;kb908002;x64addin
[SERVER]prerequisite=msi;dotnet20;dotnetlang;msxml;wse30;scripttool;sqlexpress
[SCRIPTTOOL]
prerequisite=dotnet20;dotnetlang;msxml
[DOTNET20]product_name=.net framework runtime 2.0
exe_path=support\dotnetfx\dotnetfx.exe
exe64_path=support\dotnetfx\netfx64.exe
exe_param=/q /c:"install /qn /l %tmp%\dotnet2_install.log"
vc_func=dotnetvercheck
vc_source=setupui.dll
vc_param=v2.0.50727
vc_description=rilevamento di .net runtime 2.0
diskcost=80000000
[DOTNETLANG]product_name=.net framework runtime 2.0 language pack
exe_path=support\dotnetfx\x86\%lang%\langpack.exe
exe64_path=support\dotnetfx\x64\%lang%\langpack.exe
exe_param=/q:a /c:"install.exe /qn"
exe_langs=1028,1029,1031,1036,1038,1040,1041.1042,1043,1045,1046,1049,1053,20522,1034
ignore_failure=yes
[ACAD]
prerequisite=os;ie;msi;dotnet20;dotnetlang;vba;vbalang;directx;msxml;dwfv;flash;wmf;mdac
[VAULT]Serial=msi;dotnet20;dotnetlang;msxml;wse30;dwgtrueview;designreview;kb907417;kb908002;x64addin
[SERVER]prerequisite=msi;dotnet20;dotnetlang;msxml;wse30;scripttool;sqlexpress
[SCRIPTTOOL]
prerequisite=dotnet20;dotnetlang;msxml
Tristan
Guest
Come on, you got it? it was "affective." If I wanted to be offensive, I would have used another term:wink:
liber
Guest
personally I have always considered the donkeys of the beasts smart enough, then each of us has some potential one arrives to a goal maybe another overcomes it and vice versa, otherwise where is the competitiveness? ?
cmq you have not answered about the setup.ini described here and the installation difficulties also in an operating site xp professional updated to the netframework version 3.5
cmq you have not answered about the setup.ini described here and the installation difficulties also in an operating site xp professional updated to the netframework version 3.5
Tristan
Guest
Look, I'll tell you, I've done a lot of installations but this problem of the .net framework I've never seen because, if they're all installed, autocad takes what he needs. Then, for love, there can always be a loser...