network cad3d designers in italy

[Likesteel]

Hello everyone,
I intervene on this interesting discussion to make a small contribution. First of all, you should agree on what you mean by a professional.
I am not enrolled in any albo but design metal structures on behalf of third parties for 35 years and I consider myself a professional in the field. if then the term is used to distinguish the graduate and/or graduate professional from all others, then the thing is quite different.
If you want to create a group of people that can be spaced on all or almost the sectors of the design you should clarify well who can be part of it and who not.
I, for my part, would be available to collaborations for work related to my sector.

 

[maxopus]

Hello everyone,
I intervene on this interesting discussion to make a small contribution. First of all, you should agree on what you mean by a professional.
I am not enrolled in any albo but design metal structures on behalf of third parties for 35 years and I consider myself a professional in the field. if then the term is used to distinguish the graduate and/or graduate professional from all others, then the thing is quite different.
If you want to create a group of people that can be spaced on all or almost the sectors of the design you should clarify well who can be part of it and who not.
I, for my part, would be available to collaborations for work related to my sector.

As far as I am concerned, it is not required to register for professional alibis and I think with this to express the opinion of many.

 

[re_solidworks]

we should not worry about users as a bug and its observations: in all activities there is always who helps to push, who is to look and who rhymes against.
what should be done in these cases is to collect all those who remain in favor and put them together.
I have no direct experience on how to deal with these issues and how to put together the dowels.
I don't know a first start could be just to give a name, in the second line you could share a safe space where to exchange more in-depth information than you can do in public and then... If they are roses they will bloom. I mean, in the sense that they should start working together the various members on projects of those who are currently too much work and only then put a common commercial with the task of providing work to the consortium.
In the meantime we should organize a meeting for the purpose of presentation, I would think of an event without too many frills, we must not be enchanted among us, we must begin to discuss technical/administrative and managerial issues.
I am sincere, but I am also convinced that it can work, so why not try?
maxopus, have you proposed for the name?

 

[linch]

Hello everyone,
I intervene on this interesting discussion to make a small contribution. First of all, you should agree on what you mean by a professional.
I am not enrolled in any albo but design metal structures on behalf of third parties for 35 years and I consider myself a professional in the field. if then the term is used to distinguish the graduate and/or graduate professional from all others, then the thing is quite different.
If you want to create a group of people that can be spaced on all or almost the sectors of the design you should clarify well who can be part of it and who not.
I, for my part, would be available to collaborations for work related to my sector.

Well, the proposal is interesting at least as far as I'm concerned.
a question, do you deal exclusively with metal carpentry, or can you also space in mechanics?

 

[Sandra_ME30]

If something beautiful comes to mind, let's exchange it privately, I don't want someone passing through to register the domain on his behalf just to break the boxes.

quoto and elimino what previously suggested.

 

[Meccbell]

quoto and elimino what previously suggested.

then, or sum super moderatrice :biggrin:, also eliminates the first 3 lines of my post #223. :wink:

mucias gracias:smile:

 

[Matteo]

First of all, we should agree on what we mean by a professional. [...]I am not enrolled in any albo but design metal structures on behalf of third parties for 35 years and I consider myself a professional in the field

As far as I am concerned, it is not required to register for professional alibis and I think with this to express the opinion of many.

quoto maxopus: the professional roughly coincides with a p.iva or with a context of "associated" in the study or enterprise. enrollment in an order is another thing (which in my opinion does not have anything to do with security problems than with the concept of "professionism").

When I was talking about a network of "professionists" I didn't refer to the order registration!

 

[Matteo]

(give me 3 or 4 days) I can put on a protected area on my server.

I renew the invitation, if instead you prefer to create a reserved areo on the forum, for me it is ok! reserved does not mean "secret" (also because it is not said that there may be some interested also later). It would be enough to have access to a group. I don't know if you can do it here, but on other forums I attend you (eg. www.photo4u.it).

 

[maxopus]

Thank you matteo, for the moment we are not still processing sensitive data, when the time comes we will find a solution.
by this weekend we will complete the list of interested people.
we will pass on to the next step that I think it should be about the roles, the problems to face, the definition of a budget for the constitution of the network, a test on a minimal project, to identify possible funding and/or facilities, to locate a consulting company ... there are a lot to do.

 

[Matteo]

Thank you matteo, for the moment we are not still processing sensitive data, when the time comes we will find a solution.
by this weekend we will complete the list of interested people.
we will pass on to the next step that I think it should be about the roles, the problems to face, the definition of a budget for the constitution of the network, a test on a minimal project, to identify possible funding and/or facilities, to locate a consulting company ... there are a lot to do.

ok, in the meantime I add the software available (my and the p.ivas I collaborate with under the name caedevice):

• spaceclaim + spaceclaim/smo+ (usually)
• solidworks 2011-2012
• infusion (swx+nastran) expiring... difficult to renew
• proe wf2-wf4 (+prom)
• caedium (analyi cfd con openfoam)
• caelinux
• one between inventor and creo 1.0 to be evaluated in the coming months

in the merit of the individual points that signal, this is my contribution:The Russ: I would say "all the same" each is "signer" and "service provider that can receive reports" in time. in a first phase more than "coordinator" I would talk about website gerstore and part of it (in summary common web space), at most of the search engine listings... better to be agilea test on a minimum project: yes, but very minimal, both as associates (5 are already many) and as investmentidentify possible financing and/or facilitation: for this however it takes a social reason (consortium, coop), the initial minimum project would be a small network (at the most regulated with private writings), I do not think it can access facilitiesidentify a consultancy company: boh... maybe in a second phase, after the minimum project

I do not remember who wrote it, but I liked the idea of a "roadmap" that predicts with established cadence (annual?) a series of "steps ahead" in the direction of integration. the writing of the roadmap could be the goal of this "laboratory".

laughed area: other interesting thing would make an area public but leaving the writing permission only to those who require it.

 

[Likesteel]

Well, the proposal is interesting at least as far as I'm concerned.
a question, do you deal exclusively with metal carpentry, or can you also space in mechanics?

only total and executive construction for workshops in metal carpentry.

 

[radio]

the project is getting more and more interesting and I would like to be part of it, so I propose.
my work consists, for over twenty years, in the design (no structural calculations) and engineering of lifting equipment; consisting of welded carpentry structures, hydraulic actuators, ralla-reducer groups for rotation, pins etc.
I mainly deal with the carpentry part, but not only.
In 2003 I came the ghiribizzo of wanting to enroll in the professional register of industrial experts, so much to see if I had fossilized my brain, or if I was still able to take an examination that dealt with topics that did not fall within my everyday life, and I am proud to say that in 2005 I successfully supported the state examination and I have enrolled since 2006 at the College of Brescia.
I have never done anything about the inscription, in the sense that I have never practiced the free profession, but it was a pity that I had to take away.

software used (at the company for which I work):

solid edge (prevalently).
i-deas (healthy, management of the historian).
me10 (don't tell him! :biggrin.

residence in the province of brescia

I am an employee and I understand and partly share the perplexities of free professionals to participate also those who free professional is not; and in my opinion one of the biggest problems and the unavailableness of lic. sw regular; but let's discuss it and maybe there are also solutions, I would be one of those who remain in favor.

Hello, everyone.

 

[Robiert]

What should be invented? or is it just a consulting company?
You know how much money we would do by patenting something? Well, I know.
cmq I am interested in this consortium. .

 

[linch]

What should be invented? or is it just a consulting company?
You know how much money we would do by patenting something? Well, I know.
cmq I am interested in this consortium. .

We're here to listen to you, enlighten us, and you're here to share with us on how to make so much money by patenting something. )

 

[maxopus]

What should be invented? or is it just a consulting company?
You know how much money we would do by patenting something? Well, I know.
cmq I am interested in this consortium. .

you want to create a network of designers:
1) to deal with projects that cannot be faced by a small study of 3-4 people;
2) because the exchange of knowledge makes everyone grow, technically and culturally and I would also say from the point of view of relationships;
3) because there can be good ideas to develop and that one person can not carry on.

 

[Fulvio Romano]

You know how much money we would do by patenting something? Well, I know.

You know why you made them? or do you know why someone around you made them?

 

[MBT]

You know how much money we would do by patenting something? Well, I know.

Not even a euro!
patenting doesn't make money! On the contrary
patent costs. Darling, too.
the money, possibly, you make or sell the patented product or selling the drink itself and asking for royalties
in any case, always money you have to put
before thinking about the product
then patent it
then to realize it
finally propose it and sell it

above that, it is good to emphasize that the money is making it happen, of course.
but I don't think the end of the network is making money, and it's not even the forum and its participants.
In fact, in here, everyone participates aggratis, moderators included. . .

you want to create a network of designers:
1) to deal with projects that cannot be faced by a small study of 3-4 people;
2) because the exchange of knowledge makes everyone grow, technically and culturally and I would also say from the point of view of relationships;
3) because there can be good ideas to develop and that one person can not carry on.

I would say that the explanation max is excellent, exhaustive, complete, synthetic!:finger:

 

[incasinata]

What should be invented? or is it just a consulting company?
You know how much money we would do by patenting something? Well, I know.
cmq I am interested in this consortium. .

My grandmother, she often repeated, "the first impression is what matters". ...
expensive. robiert but how do you do, to present yourself in such a way?
tell us briefly who you are, what you do, what added value would you give to this wonderful initiative.... it is too easy to say "I am interested..."

 

[Tequila]

Here I am... I had for a few days extra-work commitments so I read enough to escape the forum... the moderator removed my intervention (justly) because I did not notice that the user to whom it was reported was banished.
per maxopus: as experience I can share that of industrial machinery (mechanical press) and heavy carpentry. I also collaborated on the construction of ultralight planes so that a contribution also on these is not denied... and then having the "brevetto" of flight (the one of the ultralights is called flight certificate for accuracy) I can also offer a practical hand.. .
per robiert: as said by colleagues there is nothing to patent, but who knows, if in the future the consortium takes a good turn you can evaluate to make some patents.

 

[Fulvio Romano]

What should be invented? or is it just a consulting company?

However in principle the correct process should be:
I have an idea --> I decide to patent it
and not
I decide to make a patent --> I get an idea

Usually the second method does not bring much results. . .