• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

nx9 - official topic

  • Thread starter Thread starter The_Matrix
  • Start date Start date

The_Matrix

Guest
from today is available on ftp sites version nx9.
I avoid publishing the usual lists of new features I consider interesting, to avoid the usual "flame" of haters.
I only remember that nx9 is no longer available in 32 bit version and is also certified for w8.

many maintenance releases will no longer be produced: if I don't remember badly only 2, because the reliability of the initial version (nx9.0.1 to feb 2014 - nx9.0.2 mag 2014) has been treated a lot.

if once you read what's news you want to comment, welcome.. .
enjoyment
 
The_Matrix said:
from today is available on ftp sites version nx9.
I avoid publishing the usual lists of new features I consider interesting, to avoid the usual "flame" of haters.
I only remember that nx9 is no longer available in 32 bit version and is also certified for w8.

many maintenance releases will no longer be produced: if I don't remember badly only 2, because the reliability of the initial version (nx9.0.1 to feb 2014 - nx9.0.2 mag 2014) has been treated a lot.

if once you read what's news you want to comment, welcome.. .
enjoyment
Click to expand...
Hello beppe,
Will you be sedan?
 
downloaded and installed yesterday. read what's new.
at first sight, apart from the prejudices that can be had for the change between old icons and the new ribbon (it is called so?) seems to have a pleasant and visible graphics.
in what's new I found many interesting things. in particular since we use about 6-7% of what it does nx I have seen good eye the innovations in the drafting part. small updates to part-list management and part-family. I hope that changes in drafting have speeded up the customization process of on the go quotas (while I'm putting them).

Hi.
 
I also like the update of the feature pattern. Finally, it is expected that the entities you make the pattern (circular) can rotate during the "patterning". among us, probably in siemens they realized that autocad (2d) already previews it from the '80s (or perhaps before but I can not testify).
In any case, the warm impression is that they wanted to give a modern cad appearance both about the graphic dress (discussed but also the eye wants its part when buying something), both about the simplicity and speed of retrieval of the commands. As a result, you should be faster in completing the operation. If they did things well, I'll know it only during use...
Hi.
 
bafio said:
I also like the update of the feature pattern. Finally, it is expected that the entities you make the pattern (circular) can rotate during the "patterning". among us, probably in siemens they realized that autocad (2d) already previews it from the '80s (or perhaps before but I can not testify).
In any case, the warm impression is that they wanted to give a modern cad appearance both about the graphic dress (discussed but also the eye wants its part when buying something), both about the simplicity and speed of retrieval of the commands. As a result, you should be faster in completing the operation. If they did things well, I'll know it only during use...
Hi.
Click to expand...
... not to mention the component pattern. :cool:
 
I want to install it as soon as possible. what is the shortest way to configure the interface tolerances and customizations with the same settings as 8,5?
 
supertramp said:
I want to install it as soon as possible. what is the shortest way to configure the interface tolerances and customizations with the same settings as 8,5?
Click to expand...
interface: You will see that it is very different from 8.5, so better to see it and customize it as a leader... depends also on what design you make... If you do mechanics, it might work out like that... if you reverse for example, you better create your own ribbon...
tolerances: and all other settings. take the dpv of 8.5 and import it in 9. so you will have only the "add" to configure
customizations: depends on which...
 
The_Matrix said:
interface: you will see that it is very different from 8.5
Click to expand...
ribbon...
when I installed I thought: "oh my god: eek:!! Now how do I find the commands."
and instead it surprised me in positive. I don't have to use the find command.
Now I plan to pass all the what's new.

Hi.
beppino
 
Blessed are you...
I still can't get used to it. Oh, my God. I'm getting old.
ps.
you will not find 2 things that maybe in what's news are quoted:
- subdivision surface (which will be called "realize shape")
- patch corner. a function that allows you to automatically patch a corner/spigolo... useful to make smmoth the points where they converge 2/3 rays.
 
Bye to all,
there is the possibility to return to the 'old' interface on preferences>all preferencesuser interface

I'll still see how to get used to it.

Hi.
 
ceschi1959 said:
Bye to all,
there is the possibility to return to the 'old' interface on preferences>all preferencesuser interface

I'll still see how to get used to it.

Hi.
Click to expand...
I hoped no one would advertise it. :finger:
since it is the future best to get used to right away.
 
I tried to install the 9 but I came back to 8.5 just because next week I have my first demo to sedan in front of a lot of people.... I'll pass to 9 after 15 oct.
 
flaviobrio88 said:
I tried to install the 9 but I came back to 8.5 just because next week I have my first demo to sedan in front of a lot of people.... I'll pass to 9 after 15 oct.
Click to expand...
Unfortunately, I won't be there. .
I don't know who's coming from Italy.
 
installed since yesterday, I feel good with the new interface. more space in the screen and more at hand, congratulations.
But I have a problem: usually when I have to orientate the visual plane to a face, selection and I press f8. with nx 9 the same operation gives me a couple of mistakes before orienting the piece. Does it happen to you, too? Since I have a mach 1, is it not that with the same operation you should start a shortcut that in my license is not contemplated? If so, does anyone know how I can solve this?
thanks in advance;)Immagine 3.webp
 
supertramp said:
installed since yesterday, I feel good with the new interface. more space in the screen and more at hand, congratulations.
But I have a problem: usually when I have to orientate the visual plane to a face, selection and I press f8. with nx 9 the same operation gives me a couple of mistakes before orienting the piece. Does it happen to you, too? Since I have a mach 1, is it not that with the same operation you should start a shortcut that in my license is not contemplated? If so, does anyone know how I can solve this?
thanks in advance;)View attachment 35178
Click to expand...
there is already the mp1 that should solve the problem that there is on all licenses (they are few megas).

Hi.
 
ceschi1959 said:
there is already the mp1 that should solve the problem that there is on all licenses (they are few megas).
Click to expand...
with the mp1 solved, thanks baskets :finger:

p.
But is there no way to be warned when an update comes out? would be ideal an email to end users :)
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 24 (members: 0, guests: 24)
Back
Top