presentation new users solid edge

[cacciatorino]

using different systems in history,
from gbg then think3 with migration from 2d to 3d, then nx7,5 of ug and currently
solid edge.

practically my own path, apart from unigraphics.

Good stay in the forum! :smile:

 

[Be_on_edge]

practically my own path, apart from unigraphics.

Good stay in the forum! :smile:

could be an interesting point for a discussion like this: through which steps we arrived at solid edge
What do you mean?

 

[cacciatorino]

could be an interesting point for a discussion like this: through which steps we arrived at solid edge
What do you mean?

All right, you follow me. :finger:

 

[Xenon136]

Hello everyone, I am a young designer-designer.
I had a chance to work with catia for a short period, with proe-creo for several months and currently work in a company in the mechanical sector and use solid edge st2.
I have more than good solid edge experience.

 

[today]

hello to all, I am a junior designer in a mechanical company and I follow industrialization,
after some time spent on solidworks in the previous firm, use now solidedge st5 (from one semester),
I signed up because I find several solutions in this forum.

 

[dsp]

Hello, guys.
I am newly used solid edge st 4 , while first, but also now I use autocad and inventor, I am a designer of machine tools in the glass, marble and wood sector.
a greeting to all

 

[zioTonino]

Hello everyone...

I'm tonino and I live in bari..

for a university exam I must carry out a solid edge project! But at the moment... I don't know where to start

^

 

[lagodolio]

Bye to all,
I'm mad as a como, I've been starting to follow this forum for a while, which has already helped me find answers for different problems.
apart from a little something with proes and solidworks several years ago, I mainly use solidedge, but I like to try all the demos that happen to me (from nx to alibre). not having time and will to deepen them, it ends that if the only sw remains that I use regularly. . .
for the simple mechanical assemblies I have never had big problems, but now I would like to begin to deepen a little bit the simulation to finite elements, I would like to understand the potential and limits of an integrated solution (suitable for the rare times I have to do verification, z88 aurora). I already have a lot of doubts/questions to be submitted! !
good day, good work, good holidays (for those who have them) to all!

 

[Baley]

Hello everyone, I am daniele and I am a mechanical engineering student, I followed a computer-assisted design course and I am beginning to move the first steps with if, since I have to deliver a valid project as an exam.

 

[Paolo Frigolorpe]

Bye to all,
I am paolo, from the province of Padua, since 2008 I am a free professional, project mainly with solid edge (which I started using with version 5 in '98) but, for some customers, I also use solidworks and sometimes even draftsight. for personal curiosity I like to try also other programs not necessarily dedicated to mechanics (rhinoceros, zbrush, sketchup).
I hope I can make my contribution

 

[delki]

Bye to all,
I am paolo, from the province of Padua, since 2008 I am a free professional, project mainly with solid edge (which I started using with version 5 in '98) but, for some customers, I also use solidworks and sometimes even draftsight. for personal curiosity I like to try also other programs not necessarily dedicated to mechanics (rhinoceros, zbrush, sketchup).
I hope I can make my contribution

Hello Paul,

It's a pleasure to find you here too!

 

[Paolo Frigolorpe]

hi delki, it's a pleasure for me too

 

[Camillino]

Good morning.
I also presented myself in off topic, but I repeat here too.
I'm a chemist. for work I started using solidedge.
I am a novelty to both the software and the type of work and I enrolled to have ideas or advice.

 

[gemjnj]

Hello, everyone.
are marco, responsible for mechanical design in an industrial automation company.
We currently use thinkdesign. I searched for presentation sections on the forum but did not find them.
Anyway what I care about and solid edge. This is the forum for me.
Hello, everyone.

 

[ApeGana]

Hi, everybody, my name is crazy.
I am a mechanical engineer designer in the field machinery earth movement and work with solid edge since 2003.
I started with version 14, now I'm still at 19.

 

[PaoC]

Hello, everyone. my name is paolo and use solid edge for designing 3d models of exhibition stands. . I worked previously also with autocad and 3d studio... hello!!!

 

[Ing.D]

hello to all, my name is daniele and work in the field of mechanical design. I can use very well autocad, ansys,rhino and recently I have used for solid edge work reasons (I was firm at university time). I also hope to learn how to use other software. Greetings to all.

 

[luca_061088]

hello to all, my name is luca, dress in the province of cremona, and I am a solid edge user regarding manual and design parts!

 

[NonSonoSommetrico]

Hello, everyone.
Filip, mechanical engineer.
I worked with solid works and ansys at the university, then a short period with catia (technical office of company motorcycling), then a year as a special machine designer for a company of automations with the old cocreate modeling (now I create direct), and finally here I am, firm of tools and solid edge (st5 continuous updates).

 

[ing.Lino]

Good morning to all,

Red linen, structural engineer. I deal with metal carpenters: calculation, executive drawings, work direction.

compliments for the forum and for the richness of content.