• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

presentation new users solid edge

  • Thread starter Thread starter cacciatorino
  • Start date Start date
hello to all are sal and work in the province of gorizia in the field of naval furnishing.
so far I was required only the use of autocad and microstation. now, having to look at me a little around the search for new employment, the attention turned towards solid edge...but not only.
good collaboration to all.
Say hi.
 
Hello,
are of the province of torino,
I have no experience in field 3d, but I was so interested in this subject that I decided to leave with solidedge.
 
Bye to all,
I hope it's the right place to show up!
are small axe from the province of pavia, they are a technical designer in particular in the field of lamyeristics and from the year 2000 that design hoods, furniture and various structures in steel.
I started from the cutter passing by the various bending machines and various punching machines.
I used as cad:cadkey,autocad from v14 to v2004 ,md3 v16 and solid edge from v14 to v20
I used as cam:line 5 for punching on amada and lifesaving , for laser cutting on trumph and lifesacks, lantek for danobat punching machine.I also used software on board the performer p2 (machined with numerical control).
I used as a management:factory that is interfaced with md3 and line5.
I studied a little tutor from mathematics,physics,chemistry to philosophy,psychanalysis to languages:French,inglesis,which sometimes seems to me not to know anything.

I would like to congratulate the site, its administrator, its moderators and its active users.
I read almost all the 109 pages of the solid edge forum, the regulation and some faqs (I couldn't do it anymore),I want to say that it is a huge job yours.

Finally I would like to say thank you for accepting my registration at your site!
 
a cordial greeting to all.
Meet me:
I'm an old retired mechanical designer. in my 40 years of activity I have worked in different sectors.
I started, after the diploma of mechanical expert, in the meccanotessile to genova. always to genova in the field "half lifting (group from port and download container)". then again textile machines and automation to imola. Sassuole ceramic machines. flexographic printing machines. corrugated alessandria cardboard machines. automatic assembly lines with alessandria. machines and automation for alessandria packaging. automation of corrugated cardboard plants near lacquer. still machines for corrugated alessandria cardboard.
I now live in the province of Milan and work for myself. I used tecnigraph to finish, me10,gbg, autocad.
 
hello to all, my name is luigi, I am the owner of a company that deals with construction of machines for microcleaning of industrial surfaces (www.tecnosalgo.it) for years I had abandoned the pure design, but now, having started a collaboration with a big Italian company, and having to interface with the director of the research and development department, I have to take in hand the design, that for me was 2d.. with some approach to the 3d...
solid edge, forced choice being their standard.
first step, "work" with the v20, where to find a guide on the "philosophy" of work, more than on pure and simple commands?
Thank you very much
 
tecnosalgo said:
hello to all, my name is luigi, I am the owner of a company that deals with construction of machines for microcleaning of industrial surfaces (www.tecnosalgo.it) for years I had abandoned the pure design, but now, having started a collaboration with a big Italian company, and having to interface with the director of the research and development department, I have to take in hand the design, that for me was 2d.. with some approach to the 3d...
solid edge, forced choice being their standard.
first step, "work" with the v20, where to find a guide on the "philosophy" of work, more than on pure and simple commands?
Thank you very much
Click to expand...
hi and welcome, for the questions it is better if you open a new discussion directly in the forum, let this for the only presentations.
 
hello to all, my name is gorea, 40 years played, lighting fixtures for 15 years now.
I am a faithful solid edge since release 5.

Good work for everyone.
 
Hello everyone!. My name is roberto.. I am a student of architecture of the polytechnic of torino and oco I entered the world of bim with revit.. I'm new to the forum because you all seem very competent and I was hoping to ask for some advice:) thanks and good work!
 
Bye to all,
I'm stefano da forlì. I am an architect and I am mainly involved in design. I have been using cad for 21 years on different platforms and in the past I have worked in the automotive industry.

I don't use solidedge, but I need info on software... And here I am.
Hi.
 
I am new new new!
are in the specialist of the academy of fine arts and I take care of sculpture 3d, use rhine, solid edge, sculptris and zbrush. I really like my school and hope. Also working. I thank you in advance for the advice you can give me.
 
Hello my name is angel, I was already written on the forum for a long time, but I attended it very little.
I have been a mechanical designer since I was 19 years old, now I have 37 (just for a few days) and since 2003 I opened a consultancy and mechanical design studio, currently I have 5 employees.
the software we use mainly is solidedge.
I take advantage of greeting all members and administrators.
 
Good morning.
my name is gabriele, I am 27 years old and I make the mechanical designer, as programs use autocad mechanical and autodesk inventor..
 
hello to all

My name is Andrea, I am a senior designer, I take care of the mechanical part of a Venetian company, a greeting to all.
 
hello to all, I am a designer of parts for earth movement, but in my working life I have spaced in various sectors, automatic machines, pharmaceuticals, for wood/aluminum processing etc.
I used over time go programs, inventor, solidworks, the old one space of cocreate and now think3.
I would like to participate and enjoy this very useful forum!

♪
 
Good morning to all,
are max2, use if st3 because the company considers it useless to update the program.
I am freelance but I have a prevailing customer making machinery for a sector similar to that of diapers/pannoloni (disposable absorbent sanitary products).
I worked in automation and robotics in the automotive and textile field. I also worked in the process machine industry for the pharmaceutical industry.
and then, being freelance, I've gotten myself other types of machinery and many types of companies.
In short, I have a very diversified multi-year experience.
a program I used in the past is solid works, and I liked it.
Good job.
 
hi are a mechanical designer in the machinery sector, from bologna use mainly s.e. but also pro-e, I write as a boy, I would like to know if any of you are able to draw a 2d drum cam, with development on the floor.
 
hello max, thank you for searching, I downloaded the pdf file, and it's just what I have to do though my problem is how do I open a cylinder to get the development in the cam plane? ?
I press that with s.e. I have already tried with sheet metal but I do not have the desired result.

max2 said:
Googuing a bit I found this old discussion of 2009:
http://www.cad3d.it/forum1/showthread.php?11265-camma-a-tamburoI do not exclude that there is even more on the net.
Hi.
Click to expand...
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 15 (members: 0, guests: 15)
Back
Top