presentation new users solid edge

[TOPOLINO]

hello to all forum participants
My name is pietro I'm a former robotic slap system equipment designer.
the mechanics has always been beyond the work also my pastime, in the construction of small details for friends and components for aircraft modeling.
compliments for the highly professional and exhaustive forum, will be very useful for me to solve the various problems that will arise in the development of my motor projects.
I have used two-dimensional programs for several years:autocad and gbg, only in the last period I approached the 3d initindio to use inventor 2010 and solidworks; they are fantastic.
Thank you.
mouse

 

[cacciatorino]

hello to all forum participants
My name is pietro I'm a former robotic slap system equipment designer.
the mechanics has always been beyond the work also my pastime, in the construction of small details for friends and components for aircraft modeling.
compliments for the highly professional and exhaustive forum, will be very useful for me to solve the various problems that will arise in the development of my motor projects.
I have used two-dimensional programs for several years:autocad and gbg, only in the last period I approached the 3d initindio to use inventor 2010 and solidworks; they are fantastic.
Thank you.
mouse

to be precise(ni) this is the section where solid edge users are present, however well arrived and good stay on this forum! :smile:

Greetings also to all those who have recently presented themselves, we hope to profit from your frequenting of these pages! :finger:

 

[UI_Gortani]

hello to all, they are nicola and work as a mechanical designer, especially in the field of sheet metal. use solidedge as sw cad 2d/3d and ansys for structural simulations.
Greetings to everyone.

 

[koirkig]

Bye to all,

My name is maximum, 40 years old, mechanical designer since 1995.

8 years - earth moving machines in 2d
10 years - industrial and road cleaning machines (dishers and washers) with pro-e from 2001 to wf5
from this year return to the earth movement with solid edge st5 of which I do not know anything! and therefore I will stress you to have information

Hi.
maximum

 

[Dani250]

Hello, everyone!
are danilo, 27 years old, designer in a small company that produces probes and systems for non-destructive controls for 4 years.
for now I have dealt with simple details or small assemblies but for a few months I have been dealing with complete machines.
prepare yourself that I am a puzzler:

 

[AT_BP]

Bye to all,
I went to the province of treviso.
industrial plants for storage and transport of bulk materials in the mining sector.
I have started using solid edge for a few days (I am attending a course and I miss the last lesson), after working for years with autocad/tecnometal and more recently with bocad, limited regarding structural elements, always in the context of industrial plants.
happy to be part of this family.
Greetings to everyone!

 

[MarshallDTeach]

Hello everyone!
I'm a mechanical engineering student.

 

[Be_on_edge]

welcome to the last arrivals.

:finger:

 

[sdarnes]

Hello to all my name is dario and I am a student of mechanics of the industrial technical institute aldini valerian of bologna.
reading a few presentations I think I'm the youngest (and inexperienced) here:redface:.

 

[mikcek]

Hello, my name is michele.
it's a bit that I'm registered on the forum but since I've never been active I haven't been introduced yet.
I have a private employee past and I've been working on plant and machine designs for the industry
aerospace, automotive, industrial for a few years have passed to private activity and I basically deal with the same problems (and some new ones); I always use intensively though knowing some other applications (sw and alibre), fem side I have some experience of wb and especially cfd through cfx (poi ansys).
a greeting to all and good work!!!! :smile:

 

[Peppe L]

Good evening, everyone! I'm a mechanical engineering student!

I think I have enough knowledge about the conboscences of solid edge v18!

I hope I can exchange useful information with all users of this section. :

 

[Be_on_edge]

Good evening, everyone! I'm a mechanical engineering student!

I think I have enough knowledge about the conboscences of solid edge v18!

I hope I can exchange useful information with all users of this section. :

Welcome Giuseppe!

Since you are a student, why not go free and legally to the current version of solid edge? v18 is 7 years old on the shoulders!https://www.plm.automation.siemens.com/it_it/about_us/goplm/arc/se-academic/solid-edge-student.cfm?stc=itiia400744

 

[Losbor1]

Hello everyone,
I am a mechanical engineering student enrolled in the year. as software use solid edge v17 with academic license now for a couple of years and I have some experience with feats. in addition to this section I also follow the one dedicated to "Mechanical Engineering students". I hope to find good advice on using cad.
a greeting and a "good work" to all.

losbor1

 

[max1979]

Bye to all,
I work for a company that realizes carpenters on behalf of third parties, I deal with the development of details and nesting on sheet metal.

 

[Be_on_edge]

welcome max and losbor.

and to the new student I repeat the concept that the student version is free and it is not worth staying still to a version of last decade! :biggrin:

 

[lelepoli]

hello to all are emanuele, engineering student (management :redface: )
for a plm project I approached the world of designers and the software suggested by prof is the solid edge (use the st5 with student license).
I have to say that despite my im-preparation on the subject the project is really enjoying me!

I hope I can steal you some tricks of the trade

 

[Forghius]

hello to all my name is lorenzo and study mechanical engineering

 

[PGlowa]

hello to all my name is paolo and mechanical engineering study.
I need to install solid edge st5 but don't install it... is there already a discussion about it?
Hello and thank you

 

[Tequila]

hello to all my name is paolo and mechanical engineering study.
I need to install solid edge st5 but don't install it... is there already a discussion about it?
Hello and thank you

Hello and welcome... for your problem open a new thread in the solid edge forum, this is just for presentations.
also uses the "search" command at the top right of the browser to do the search.

 

[Paolo_Idea]

hello to all are paolo
live and work in jesi in brands
I am involved in research and development products in the field of plastics .
I hide as an injection mold designer using different systems in history,
from gbg then think3 with migration from 2d to 3d, then nx7,5 of ug and currently
I am mainly a project manager, so my knowledge of systems is a bit clouded,
definitely here I can find some answers to my why.

Hi.
Palo