video card firepro w5000 not detected

[gtsolid]

Bye to all,
I have a correctly installed firepro w5000, but if I launch the 3dconfig command from my acad2017 I see the enclosed window, it seems that I go to use the chipset integrated in the mobo
Can you tell me how I can use the discrete card as the first choice?

 

[TAURUS77]

Hello gtsolid,
enter the bios and disable the integral intel.

 

[TAURUS77]

then go to the radeon pro settings panel and assign autocad as software to feed to the w5000.

 

[gtsolid]

Is there any particular setting for acad?

 

[TAURUS77]

Taking a look at my control panel seems to me no.... try and see how it goes.

 

[gtsolid]

It's better, even if there's still a little bit of shooting.
the graphics card in use now is correct

 

[TAURUS77]

I don't have autocad installed... which you mean by shooting behaviour

 

[gtsolid]

Move the mouse and the cursor moves to snaps, especially just after you start moving it

 

[TAURUS77]

Move the mouse and the cursor moves to snaps, especially just after you start moving it

but only with autocad or always... Try to take a look here

https://knowledge.autodesk.com/it/s...s/ita/cursor-is-slow-or-jerky-in-autocad.html

 

[gtsolid]

solo autocad

 

[TAURUS77]

https://knowledge.autodesk.com/it/s...disable-hardware-acceleration-in-autocad.html

 

[TAURUS77]

As far as the drivers have just left the new drivers for the w5000 I suggest you update them.

 

[TAURUS77]

What hardware configuration do you have?

 

[gtsolid]

great for the update. I try and tell you. below my configuration

 

[gtsolid]

https://knowledge.autodesk.com/it/s...disable-hardware-acceleration-in-autocad.html

It doesn't work. without acceleration goes worse than before. idem with new driver

 

[TAURUS77]

strange... I have your own card and never had problems

 

[TAURUS77]

non penso sia un problema hardware ma software...

 

[gtsolid]

reinstallo acad?

 

[TAURUS77]

i driver o autocad?

 

[gtsolid]

autocad I mean